Epson Projector Binding

This binding should be compatible with Epson projectors which support ESC/VP21 protocol over serial port.

Binding Configuration

This binding can be configured in the file services/epsonprojector.cfg.

Property Default Required Description
<device-id>.serialPort   Yes serial port device name that is connected to the Epson projector to control, e.g. COM1 on Windows, /dev/ttyS0 on Linux or /dev/tty.PL2303-0000103D on Mac

where <device-id> is a name you choose (like hometheater), and this configuration property can be repeated with different names to control more than one Epson projector.

Examples:

hometheater.serialPort=/dev/tty.usbserial
office.serialPort=/dev/ttyS0

Item Configuration

The syntax is:

epsonprojector="<direction><device-id>:<device-command>[:<update-interval>]"

where:

  • <direction> is one of the following values:
  • < - for inbound communication
  • > - for outbound communication
  • * - for either inbound or outbound communication, e.g bi-directional

  • <device-id> corresponds device which is introduced in the binding configuration

  • <device-command> corresponds to the Epson projector command. See complete list below.

  • <update-interval> is optional, and corresponds to the update interval of the item. Update interval is only supported by the inbound and bi-directional items. For some of the commands, the projector will only respond when projector is running. This situation can be handled with special interval, where interval is started with “ON,” prefix.

Examples, how to configure your items:

Switch Power    { epsonprojector="hometheater:Power:60000" }
String Source   { epsonprojector="hometheater:Source:ON,60000" }
Number LampTime { epsonprojector="<hometheater:LampTime:60000" }

List of supported commands

Command Item Type Purpose Note
Power Switch    
PowerState String    
LampTime Number    
KeyCode Number    
VerticalKeystone Number    
HorizontalKeystone Number    
AutoKeystone Number    
AspectRatio String    
Luminance String    
Source String    
DirectSource Number    
Brightness Number    
Contrast Number    
Density Number    
Tint Number    
Sharpness Number    
ColorTemperature Number    
FleshTemperature Number    
ColorMode String    
HorizontalPosition Number    
VerticalPosition Number    
Tracking Number    
Sync Number    
OffsetRed Number    
OffsetGreen Number    
OffsetBlue Number    
GainRed Number    
GainGreen Number    
GainBlue Number    
Gamma String    
GammaStep Number    
Color String    
Mute Switch    
HorizontalReverse Switch    
VerticalReverse Switch    
Background String    
ErrCode Number    
ErrMessage String    

References

Full Example

items/epson.items

Switch epsonPower                          { epsonprojector="hometheater:Power:60000" }
String epsonSource        "Source [%s]"    { epsonprojector="hometheater:Source:ON,60000" }
Number epsonDirectSource  "Direct Source"  { epsonprojector="hometheater:DirectSource:ON,60000"}

Switch epsonMute               { epsonprojector="hometheater:Mute:ON,60000" }

Switch epsonHorizontalReverse  { epsonprojector="hometheater:HorizontalReverse:ON,60000" }
Switch epsonVerticalReverse    { epsonprojector="hometheater:VerticalReverse:ON,60000" }

String epsonAspectRatio       "AspectRatio [%s]"        { epsonprojector="hometheater:AspectRatio:ON,60000" }
String epsonColorMode         "ColorMode [%s]"          { epsonprojector="hometheater:ColorMode:ON,60000" }
Number epsonColorTemperature  "Color Temperature [%d]"  <colorwheel>   { epsonprojector="<hometheater:ColorTemperature:ON,60000" }

Number epsonLampTime    "Lamp Time [%d h]"  <switch>       { epsonprojector="<hometheater:LampTime:60000" }
Number epsonErrCode     "ErrCode [%d]"      <"siren-on">   { epsonprojector="<hometheater:ErrCode:ON,60000" }
String epsonErrMessage  "ErrMessage [%s]"   <"siren-off">  { epsonprojector="<hometheater:ErrMessage:ON,60000" }

sitemaps/epson.sitemap

sitemap epson label="Epson Projector Demo"
{
    Frame label="Controls" {
        Switch     item=epsonPower         label="Power"
        Text       item=epsonSource
        Selection  item=epsonDirectSource  label="DirectSource" mappings=[20="COMPONENT", 32="PC", 48=HDMI1, 160=HDMI2, 65=VIDEO, 66=SVIDEO]
        Switch     item=epsonMute label="Mute"
    }
    Frame label="Flip Projection" {
        Switch  item=epsonHorizontalReverse label="Horizontal Reverse"
        Switch  item=epsonVerticalReverse   label="Vertical Reverse"
    }
    Frame label="Info" {
        Text  item=epsonAspectRatio
        Text  item=epsonColorMode
        Text  item=epsonColorTemperature
        Text  item=epsonLampTime
        Text  item=epsonErrCode
        Text  item=epsonErrMessage
    }
}