Keba Binding

This binding integrates the Keba KeContact EV Charging Stations.

Supported Things

Currently the Keba KeContact P20 stations are supported by this binding.

Binding Configuration

The binding uses the default UDP port number to connect to the Keba Charging Station. So, no special configuration of the binding itself is required.

Thing Configuration

The Keba KeContact P20 requires the ip address as a configuration value in order for the binding to know where to access it. Optionally, a refresh interval (in seconds) can be defined that steers the polling of the actual state of the charging station In the thing file, this looks e.g. like

Thing keba:kecontactp20:1 [ ipAddress="192.168.0.64", refreshInterval=30 ]

the refreshInterval can optinally be used in combination with autoupdate="false" in the .items file so that the Items are updated with the latest actual value sent by the charging station

Channels

All devices support the following channels (non exhaustive):

Channel Type ID Item Type Description
state Number This channel indicates the current operational state of the wallbox
maxpresetcurrent Number This channel supports adjusting the maximim current the charging station should deliver to the EV
power Number This channel indicates the active power delivered by the charging station
I1/2/3 Number This channel indicates the current for the given phase
U1/2/3 Number This channel indicates the voltage for the given phase

Full Example

demo.Things:

Thing keba:kecontactp20:1 [ipAddress="192.168.0.64", refreshInterval=30]

demo.items:

Dimmer KebaCurrentRange  {channel="keba:kecontactp20:1:maxpresetcurrentrange", autoupdate="false"} 
Number KebaCurrent  {channel="keba:kecontactp20:1:maxpresetcurrent", autoupdate="false"}
Number KebaSystemCurrent  {channel="keba:kecontactp20:1:maxsystemcurrent"} 
Number KebaFailSafeCurrent  {channel="keba:kecontactp20:1:failsafecurrent"} 
String KebaState  {channel="keba:kecontactp20:1:state"}
Switch KebaSwitch  {channel="keba:kecontactp20:1:enabled", autoupdate="false"}
Switch KebaWallboxPlugged  {channel="keba:kecontactp20:1:wallbox"}
Switch KebaVehiclePlugged  {channel="keba:kecontactp20:1:vehicle"}
Switch KebaPlugLocked  {channel="keba:kecontactp20:1:locked"}
DateTime KebaUptime "Uptime [%1$tY Y, %1$tm M, %1$td D,  %1$tT]"  {channel="keba:kecontactp20:1:uptime"}
Number KebaI1  {channel="keba:kecontactp20:1:I1"}
Number KebaI2  {channel="keba:kecontactp20:1:I2"}
Number KebaI3  {channel="keba:kecontactp20:1:I3"}
Number KebaU1  {channel="keba:kecontactp20:1:U1"}
Number KebaU2  {channel="keba:kecontactp20:1:U2"}
Number KebaU3  {channel="keba:kecontactp20:1:U3"}
Number KebaPower  {channel="keba:kecontactp20:1:power"}
Number KebaSessionEnergy  {channel="keba:kecontactp20:1:sessionconsumptio"}
Number KebaTotalEnergy  {channel="keba:kecontactp20:1:totalconsumption"}
Switch KebaInputSwitch  {channel="keba:kecontactp20:1:input"}
Switch KebaOutputSwitch  {channel="keba:kecontactp20:1:output"}

demo.sitemap:

sitemap demo label="Main Menu"
{
			Text label="Charging Station" {
				Text item=KebaState label="Operating State [%s]"
				Text item=KebaUptime
				Switch item=KebaSwitch label="Enabled" mappings=[ON=ON, OFF=OFF ]
				Switch item=KebaWallboxPlugged label="Plugged into wallbox" mappings=[ON=ON, OFF=OFF ]
				Switch item=KebaVehiclePlugged label="Plugged into vehicle" mappings=[ON=ON, OFF=OFF ]
				Switch item=KebaPlugLocked label="Plug locked" mappings=[ON=ON, OFF=OFF ]
				Slider item=KebaCurrentRange switchSupport label="Maximum supply current [%.1f %%]"
				Text item=KebaCurrent label="Maximum supply current [%.0f mA]"
				Text item=KebaSystemCurrent label="Maximum system supply current [%.0f mA]"
				Text item=KebaFailSafeCurrent label="Failsafe supply current [%.0f mA]"
				Text item=KebaSessionEnergy label="Energy during current session [%.0f Wh]"
				Text item=KebaTotalEnergy label="Energy during all sessions [%.0f Wh]"	
			}
}