openHAB 2 is based on the Eclipse SmartHome framework and is fully written in Java. As such, it only depends on a Java Virtual Machine, which is available for many platforms. openHAB can be executed on different versions of Mac OS X and Windows and many different variants of Linux (Ubuntu, Raspbian, …).
Please be aware of the fact, that openHAB 2 is based on a new core and introduces new concepts. Therefore, tutorials and help you may find on the internet for openHAB 1 might be outdated!
- You are new to openHAB 2 and want to give it a try? You are in luck:
- Set up openHAB 2 on your local PC or Mac in just a few steps.
- You gained some experience and want to use openHAB to seriously control your home?
Typical hardware and software requirements are:
- 24/7 availability: A dedicated system connected by Ethernet and running continuously.
- Energy and space efficient: A device capable of performing the task at hand without being exaggerated
- Extendibility: Your system should be capable of running additional software like an MQTT broker or a persistence and graphing software.
- Peripherals: Depending on your home automation hardware, you will need additional peripheral devices such as a WiFi interface or a special USB radio module.
Many devices are suited to host a continuous installation of openHAB 2. Experiences with different devices and environments can be found in the community forum hardware section.
The Raspberry Pi as a minimal sufficient device is quite popular, especially as we offer a quick setup with openHABian. A popular alternative is our solution for the Synology DiskStation, which many users already own in their homes. The previously mentioned openHABian can also be used to kickstart your openHAB 2 experience on existing Debian/Ubuntu based Linux systems.
Please check the menu to the left for all available options.
Make sure that you have an up to date Java platform installed on your host system. Zulu is currently the recommended Java platform for openHAB. Download and installation instructions can be found on Azul Systems’ Zulu website. Oracle Java is also suitable for most configurations but licencing restrictions may apply. OpenJDK may also be used, but it has some known limitations with openHAB and is not recommended.
|Zulu||Completely open source, fully certified Java SE compliant build of OpenJDK, embedded version optimized for ARM devices available here|
|Oracle Java||Full openHAB support on all platforms||Licensing restrictions, manual installation required on many Linux systems: Ubuntu, Mint, and Debian are some examples|
|OpenJDK||Supported by many Linux distributions, packages typically available||Performance issues on ARM platforms, compatibility issues with certain bindings and certificates|
Please use the 32-bit version of the JVM for ARM platforms, even on 64-bit operating systems. Serial connections won’t work with a 64-bit JVM, preventing bindings like Z-Wave from functioning.
As for now, a pre-release Java 9 installation is not recommended and is not yet supported by openHAB 2.
For best compatibility, namely with the openHAB Cloud service myopenhab.org, the minimum recommended Java 8 revision is “101”.
Attention: Most package managers serve an older revision.
Check your current Java version by opening a command line console and typing
java version "1.8.0_121" Java(TM) SE Runtime Environment (build 1.8.0_121-b13) Java HotSpot(TM) Client VM (build 25.121-b13, mixed mode)
Before you can start, three decisions have to be made:
- openHAB 2 is available as a platform independent archive file or through a package repository:
- Stable release or cutting edge:
Please follow the instructions in the installation article matching your platform (see the menu to the left).
After you got openHAB 2 set up and running, there are a few additional setup steps you should consider:
Configure a network share on your openHAB host device and mount it locally: Linux Samba Share, Windows file sharing, …
Install Visual Studio Code and the openHAB VS Code Extension on your local machine, to manage your (remote) configuration files. The openHAB VS Code Extension comes with built-in support for the openHAB syntax and elements.
With the openHAB 2 distribution up and running, you should now continue with the Beginner Tutorial or by working on your own configuration.
The very active openHAB Community Forum provides many more details and hints. If you run into any problems, use the search function or open a new thread with your detailed question.