DSB29 Door/Window sensor Gen2

This describes the Z-Wave device DSB29, manufactured by AEON Labs with the thing type UID of aeon_dsb29_00_000.

Door/Window sensor Gen2

Channels

The following table summarises the channels available for the DSB29 Door/Window sensor Gen2.

Channel Channel Id Channel Type UID Category Item Type
Binary Sensor sensor_door sensor_door Door Contact
Alarm (general) alarm_general alarm_general Door Switch
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the DSB29 Door/Window sensor Gen2. Detailed information on each parameter can be found below.

Parameter Description
1: Send Sensor binary report on open/close events  
2: Enable wake up 10 minutes when power on  
3: Send Basic Set on open/close event  
121: command class to use for open/close parameter 4 (LSB)
121: command class to use for open/close see overview (parameter 3)
1: Group 1  

1: Send Sensor binary report on open/close events

Property Value      
Configuration ID config_1_1      
Data Type INTEGER   Default Value 0
Options On for opened, Off for closed (0)      
  Off for opened, On for closed (1)      

2: Enable wake up 10 minutes when power on

Property Value      
Configuration ID config_2_1      
Data Type INTEGER   Default Value 0
Options No (0)      
  Yes (1)      

3: Send Basic Set on open/close event

Property Value      
Configuration ID config_3_1      
Data Type INTEGER   Default Value 0
Options On for opened, Off for closed (0)      
  Off for opened, On for closed (1)      

121: command class to use for open/close

parameter 4 (LSB)

Overview

Set to 0 for no report

Set to 1 for BATTERY report

Set to 16 for SENSOR_BINARY report

Set to 17 for SENSOR_BINARY and BATTERY

Property Value      
Configuration ID config_121_4_000000FF      
Data Type INTEGER   Default Value 0
Options not set (0)      
  BATTERY report (1)      
  SENSOR BINARY report (16)      
  SENSOR BINARY and BATTERY report (17)      

121: command class to use for open/close

see overview (parameter 3)

Overview

set to 0 for no report

set to 1 for BASIC report (default)

Property Value      
Configuration ID config_121_4_0000FF00      
Data Type INTEGER   Default Value 1
Options not set (0)      
  BASIC report (1)      

1: Group 1

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.