DSB54 Recessed Door/Window Sensor

This describes the Z-Wave device DSB54, manufactured by AEON Labs with the thing type UID of aeon_dsb54_00_000.

Recessed Door/Window Sensor

Channels

The following table summarises the channels available for the DSB54 Recessed Door/Window Sensor.

Channel Channel Id Channel Type UID Category Item Type
Door Sensor sensor_door sensor_door Door Contact
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the DSB54 Recessed Door/Window Sensor. Detailed information on each parameter can be found below.

Parameter Description
1: Send Sensor binary report on open/close events  
3: Send Basic Set on open/close event  
101: Low battery voltage check parameter defines, if battery check function is possible, when battery is below warning vo…
111: Low battery voltage check time Minimum battery low check Interval time is 4 minutes (240 seconds)
121: Flag values for triggered magnet switch Flag values for which reports to send when the magnet switch is triggered
252: Permit other configurations Lock or Unlock other configuration set function
255: Reset to default Reset to the default configuration
1: State Updates  
2: Battery Warnings  

1: Send Sensor binary report on open/close events

Property Value      
Configuration ID config_1_1      
Data Type INTEGER   Default Value 0
Options On for opened, Off for closed (0)      
  Off for opened, On for closed (1)      

3: Send Basic Set on open/close event

Property Value      
Configuration ID config_3_1      
Data Type INTEGER   Default Value 0
Options On for opened, Off for closed (0)      
  Off for opened, On for closed (1)      

101: Low battery voltage check

parameter defines, if battery check function is possible, when battery is below warning voltage

Property Value      
Configuration ID config_101_1      
Data Type INTEGER   Default Value 0
Options Disable (0)      
  Enable (1)      

111: Low battery voltage check time

Minimum battery low check Interval time is 4 minutes (240 seconds)

Property Value
Configuration ID config_111_4
Data Type INTEGER
Range 0 to 65535
Default Value 112

121: Flag values for triggered magnet switch

Flag values for which reports to send when the magnet switch is triggered

Property Value
Configuration ID config_121_4
Data Type INTEGER
Range 0 to 65535
Default Value 256

252: Permit other configurations

Lock or Unlock other configuration set function

Property Value      
Configuration ID config_252_1      
Data Type INTEGER   Default Value 0
Options Unlock (0)      
  Lock (1)      

255: Reset to default

Reset to the default configuration

Property Value      
Configuration ID config_255_2_wo      
Data Type INTEGER   Default Value 0
Options Reset (0)      

1: State Updates

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Battery Warnings

Property Value
Configuration ID group_2
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.