DSC18 Micro Smart Energy Switch G2

This describes the Z-Wave device DSC18, manufactured by AEON Labs with the thing type UID of aeon_dsc18_00_000.

Micro Smart Energy Switch G2

Channels

The following table summarises the channels available for the DSC18 Micro Smart Energy Switch G2.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Electric meter (watts) meter_watts meter_watts Energy Number
Electric meter (amps) meter_current meter_current Energy Number
Electric meter (kWh) meter_kwh meter_kwh Energy Number
Electric meter (volts) meter_voltage meter_voltage Energy Number
Reset Meter meter_reset meter_reset Energy Switch

Device Configuration

The following table provides a summary of the configuration parameters available in the DSC18 Micro Smart Energy Switch G2. Detailed information on each parameter can be found below.

Parameter Description
2: Make Micro Smart Switch Blink  
3: Current Overload Protection  
80: Notification on Status Change  
90: Automated sending of a Report triggered by minimal change of value.  
91: Minimum Change to send Report (Watt)  
92: Minimum Change to send Report (%)  
101: Which reports need to send automatically in timing intervals for group 1  
102: Which reports need to send automatically in timing intervals for group 2  
103: Which reports need to send automatically in timing intervals for group 3  
111: Interval to send out reports of group 1  
112: Interval to send out reports of group 2  
113: Interval to send out reports of group 3  
120: Turn External Button Mode  
1: Target for automatic meter reports  
2: Target for automatic reports  
Property Value
Configuration ID config_2_2
Data Type INTEGER
Range 0 to 65535
Default Value 0

3: Current Overload Protection

Property Value      
Configuration ID config_3_1      
Data Type INTEGER   Default Value 0
Options Deactivate (0)      
  Activate (1)      

80: Notification on Status Change

Property Value      
Configuration ID config_80_1      
Data Type INTEGER   Default Value 0
Options Deactivate (0)      
  Hail CC Sent (1)      
  Basic CC Report Sent (2)      

90: Automated sending of a Report triggered by minimal change of value.

Property Value      
Configuration ID config_90_1      
Data Type INTEGER   Default Value 0
Options Deavtivate (0)      
  Activate (1)      

91: Minimum Change to send Report (Watt)

Property Value
Configuration ID config_91_2
Data Type INTEGER
Range 0 to 65535
Default Value 25

92: Minimum Change to send Report (%)

Property Value
Configuration ID config_92_1
Data Type INTEGER
Range 0 to 255
Default Value 5

101: Which reports need to send automatically in timing intervals for group 1

Property Value
Configuration ID config_101_4
Data Type INTEGER
Range 0 to 65535
Default Value 4

102: Which reports need to send automatically in timing intervals for group 2

Property Value
Configuration ID config_102_4
Data Type INTEGER
Range 0 to 65535
Default Value 8

103: Which reports need to send automatically in timing intervals for group 3

Property Value
Configuration ID config_103_4
Data Type INTEGER
Range 0 to 65535
Default Value 0

111: Interval to send out reports of group 1

Property Value
Configuration ID config_111_4
Data Type INTEGER
Range 1 to 2678400
Default Value 3

112: Interval to send out reports of group 2

Property Value
Configuration ID config_112_4
Data Type INTEGER
Range 1 to 2678400
Default Value 600

113: Interval to send out reports of group 3

Property Value
Configuration ID config_113_4
Data Type INTEGER
Range 1 to 2678400
Default Value 600

120: Turn External Button Mode

Property Value      
Configuration ID config_120_1      
Data Type INTEGER   Default Value 255
Options Momentary Button Mode (0)      
  2 State Switch Mode (1)      
  3 Way Switch Mode (2)      

1: Target for automatic meter reports

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Target for automatic reports

Property Value
Configuration ID group_2
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.