The openHAB Documentation Has Moved

The documentation has moved to openhab.org/docs and openhab.org/addons.

Please use the link below to be redirected to the new version of this article, and update your bookmarks.

ASL-03 August Smart Lock Pro 3rd Gen

This describes the Z-Wave device ASL-03, manufactured by August Smart Locks with the thing type UID of august_asl03_00_000.

The device is in the category of Lock, defining Devices whose primary pupose is locking something.

ASL-03 product image

The ASL-03 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is unable to participate in the routing of data from other devices.

Overview

Give your customer total control over their front door, from anywhere. The August Smart Lock Pro is the leading Z-Wave Plus retrofit smart lock. You can lock and unlock your door, create virtual keys for guests, and keep track of who comes and goes with a 24/7 activity log, all from your iOS or Android smartphone. The August Smart Lock Pro features Z-Wave Plus and BLE and it is the only lock to support the three leading voice-assistants, Siri, Google Assistant, and Amazon Alexa. The lock quickly installs on the inside of your door with just a screwdriver. Keep your exterior door hardware exactly as it is and use your traditional key any time.

Inclusion Information

In order to include the August Smart Lock on to a Z-Wave network the user will have to do the following:

  1. Open the August app 2. Go to the Lock Settings screen 3. Select Z-Wave Settings 4. Select Add To A Z-Wave Network 5. Put the controller into inclusion mode and select My Hub is in Inclusion Mode on the August app

Exclusion Information

In order to exclude the August Smart Lock from a Z-Wave network the user will have to do the following:

  1. Open the August app 2. Go to the Lock Settings screen 3. Select Z-Wave Settings 4. Select Remove Z-Wave Device 5. Put the controller into exclusion mode and select My Hub is in Exlusion Mode on the August app

Wakeup Information

Any operation (manual, RF, etc.) will wake up the lock.

Channels

The following table summarises the channels available for the ASL-03 -:

Channel Channel Id Category Item Type
Door Lock sensor_door Door Contact
Alarm (access) alarm_entry Door Switch
Battery Level battery-level Battery Number

Door Lock

Indicates if the door/window is open or closed.

The sensor_door channel supports the Contact item and is in the Door category. This is a read only channel so will only be updated following state changes from the device.

The following state translation is provided for this channel to the Contact item type -:

Value Label
OPEN Open
CLOSED Closed

Alarm (access)

Indicates if the entry alarm is triggered.

The alarm_entry channel supports the Switch item and is in the Door category. This is a read only channel so will only be updated following state changes from the device.

The following state translation is provided for this channel to the Switch item type -:

Value Label
ON Open
OFF Closed

Battery Level

Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.

The battery-level channel supports the Number item and is in the Battery category.

Device Configuration

The device has no configuration parameters configured.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The ASL-03 supports 2 association groups.

Group 1: Lifeline

battery status, door lock operation status, and device reset locally This group supports 5 nodes.

Group 2: Report 2

Door lock operation status This group supports 5 nodes.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1  
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1  
COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1  
COMMAND_CLASS_ZWAVEPLUS_INFO_V2  
COMMAND_CLASS_DOOR_LOCK_V2  
COMMAND_CLASS_ALARM_V8  
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2  
COMMAND_CLASS_POWERLEVEL_V1  
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4  
COMMAND_CLASS_BATTERY_V1  
COMMAND_CLASS_ASSOCIATION_V2  
COMMAND_CLASS_VERSION_V2  
COMMAND_CLASS_SECURITY_V1  

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.