doorSensor Door Sensor

This describes the Z-Wave device doorSensor, manufactured by BeNext with the thing type UID of benext_doorsensor_00_000.

Door Sensor

Channels

The following table summarises the channels available for the doorSensor Door Sensor.

Channel Channel Id Channel Type UID Category Item Type
Door Sensor sensor_door sensor_door Door Contact
Sensor (temperature) sensor_temperature sensor_temperature Temperature Number
Alarm (CO) alarm_co alarm_co Door Switch
  battery-level system.battery-level    

Sensor (temperature)

Scale

Select the scale for temperature readings

Property Value      
Configuration ID config_scale      
Data Type TEXT   Default Value 0
Options Celsius (0)      
  Fahrenheit (1)      

Device Configuration

The following table provides a summary of the configuration parameters available in the doorSensor Door Sensor. Detailed information on each parameter can be found below.

Parameter Description
1: Reset to factory settings Set all configuration values to default values (factory settings).
2: External contact behavior Configure what the external contact sends when triggered.
5: Operating mode. The main operating mode for the device.
6: Temperature offset An offset for the temperature.
1: Send frame to every node in this group (internal contact)  
2: Send frame to every node in this group (external contact)  

1: Reset to factory settings

Set all configuration values to default values (factory settings).

Property Value
Configuration ID config_1_1
Data Type INTEGER
Range 0 to 255
Default Value 0

2: External contact behavior

Configure what the external contact sends when triggered.

Property Value      
Configuration ID config_2_1      
Data Type INTEGER   Default Value 0
Options Send alarm (0)      
  Send basic frame (1)      

5: Operating mode.

The main operating mode for the device.

Property Value      
Configuration ID config_5_1      
Data Type INTEGER   Default Value 1
Options Normal (1)      
  Mode 1 report (2)      
  Always-on (3)      

6: Temperature offset

An offset for the temperature.

Property Value
Configuration ID config_6_2
Data Type INTEGER
Range -32768 to 32767
Default Value 0

1: Send frame to every node in this group (internal contact)

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Send frame to every node in this group (external contact)

Property Value
Configuration ID group_2
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.