SM103 Door/Window Contact

This describes the Z-Wave device SM103, manufactured by Chromagic Technologies Corporation with the thing type UID of chromagic_sm103_00_000.

Door/Window Contact

Channels

The following table summarises the channels available for the SM103 Door/Window Contact.

Channel Channel Id Channel Type UID Category Item Type
Binary Sensor sensor_binary sensor_binary Door Switch
Alarm alarm_general alarm_general Door Switch
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the SM103 Door/Window Contact. Detailed information on each parameter can be found below.

Parameter Description
1: Basic Set Level Value to be sent with a BASIC SET command
2: Configuring the OFF Delay OFF Delay in seconds
1: Tamper Event Report (Alarm Report)  
2: Control other Z-Wave Devices  

1: Basic Set Level

Value to be sent with a BASIC SET command

Property Value
Configuration ID config_1_1
Data Type INTEGER
Range 0 to 99
Default Value 99

2: Configuring the OFF Delay

OFF Delay in seconds

Property Value
Configuration ID config_2_1
Data Type INTEGER
Range 0 to 127
Default Value 1

1: Tamper Event Report (Alarm Report)

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Control other Z-Wave Devices

Property Value
Configuration ID group_2
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.