The openHAB Documentation Has Moved

The documentation has moved to openhab.org/docs and openhab.org/addons.

Please use the link below to be redirected to the new version of this article, and update your bookmarks.

RF9517 Accessory Switch

This describes the Z-Wave device RF9517, manufactured by Cooper Wiring Devices with the thing type UID of cooper_rf9517_00_000.

The RF9517 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data from other devices.

Overview

Aspire RF Accessory Switch Compatible with Aspire RF switch (RF9501, RF9518) for wireless 3-way control eliminating the need for traditional 3-way wiring (up to 5 locations)

Inclusion Information

switch will have blinking blue LED when first powered on initiate inclusion mode on controller device press the RF9517 button once RF9517 blue LED should turn solid indicating inclusion.

Exclusion Information

initiate exclusion mode on controller device press the RF9517 button once RF9517 blue LED should begin blinking indicating inclusion.

Channels

The following table summarises the channels available for the RF9517 -:

Channel Channel Id Category Item Type
Switch switch_binary Switch Switch
Scene Number scene_number   Number

Switch

Switch the power on and off.

The switch_binary channel supports the Switch item and is in the Switch category.

Scene Number

Triggers when a scene button is pressed.

The scene_number channel supports the Number item.

Device Configuration

The following table provides a summary of the 1 configuration parameters available in the RF9517. Detailed information on each parameter can be found in the sections below.

Param Name Description
1 Delayed OFF time The time in seconds the switch will delay when trigger the delayed off feature
  Switch All Mode Set the mode for the switch when receiving SWITCH ALL commands

Parameter 1: Delayed OFF time

The time in seconds the switch will delay when trigger the delayed off feature

Values in the range 0 to 255 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_1_1 and is of type INTEGER.

Switch All Mode

Set the mode for the switch when receiving SWITCH ALL commands.

The following option values may be configured -: | Value | Description | |——–|————-| | 0 | Exclude from All On and All Off groups | | 1 | Include in All On group | | 2 | Include in All Off group | | 255 | Include in All On and All Off groups |

This parameter has the configuration ID switchall_mode and is of type INTEGER.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The RF9517 supports 2 association groups.

Group 1: Group 1

This group supports 5 nodes.

Group 127: Group 255

This group supports 1 nodes.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1  
COMMAND_CLASS_BASIC_V1  
COMMAND_CLASS_SWITCH_BINARY_V1 Linked to BASIC
COMMAND_CLASS_SWITCH_ALL_V1  
COMMAND_CLASS_SCENE_ACTIVATION_V1  
COMMAND_CLASS_CONFIGURATION_V1  
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1  
COMMAND_CLASS_NODE_NAMING_V1  
COMMAND_CLASS_HAIL_V0  
COMMAND_CLASS_ASSOCIATION_V1  
COMMAND_CLASS_VERSION_V1  
COMMAND_CLASS_INDICATOR_V1  

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.