RF9542 Dimmer Accessory Switch

This describes the Z-Wave device RF9542, manufactured by Cooper Wiring Devices with the thing type UID of cooper_rf9542_00_000.

Dimmer Accessory Switch

Channels

The following table summarises the channels available for the RF9542 Dimmer Accessory Switch.

Channel Channel Id Channel Type UID Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer
Scene Number scene_number scene_number   Number
Dimmer Ramp Time config_decimal_param7 config_decimal   Decimal
Alarm alarm_general alarm_general Door Switch

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the RF9542 Dimmer Accessory Switch. Detailed information on each parameter can be found below.

Parameter Description
1: Delayed OFF time delay time in seconds
2: Panic ON time time in seconds for panic mode
3: Panic OFF time off time in seconds for panic mode
4: Basic Set Value send this value to associated devices
5: Power Up State Power Up State of the switch
6: Panic mode enable Enables this switch to participate in panic mode
7: Dimmer Ramp Time time in seconds to ramp to desired level
1: Group 1  

1: Delayed OFF time

delay time in seconds

Overview

The amount of time in seconds the switch will delay when trigger the delayed off feature

Property Value
Configuration ID config_1_1
Data Type INTEGER
Range 0 to 255
Default Value 0

2: Panic ON time

time in seconds for panic mode

Overview

The amount of time in seconds the switch will turn on for when panic mode is triggered

Property Value
Configuration ID config_2_1
Data Type INTEGER
Range 0 to 255
Default Value 0

3: Panic OFF time

off time in seconds for panic mode

Overview

The amount of time in seconds the switch will turn off for when panic mode is triggered

Property Value
Configuration ID config_3_1
Data Type INTEGER
Range 0 to 255
Default Value 0

4: Basic Set Value

send this value to associated devices

Overview

Setting this to anything other than 0 will cause the value to be transmitted to devices in the association group when the switch is triggered. A setting other than 0 will likely result in undesired operation

Property Value
Configuration ID config_4_1
Data Type INTEGER
Range 0 to 255
Default Value 0

5: Power Up State

Power Up State of the switch

Property Value      
Configuration ID config_5_1      
Data Type INTEGER   Default Value 1
Options OFF (1)      
  ON (2)      
  Last State (3)      

6: Panic mode enable

Enables this switch to participate in panic mode

Property Value      
Configuration ID config_6_1      
Data Type INTEGER   Default Value 1
Options OFF (1)      
  ON (2)      

7: Dimmer Ramp Time

time in seconds to ramp to desired level

Overview

The amount of time in seconds the switch will take to reach the desired dim level

Property Value
Configuration ID config_7_1
Data Type INTEGER
Range 0 to 255
Default Value 0

1: Group 1

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.