09813 Home Control Smoke Detector

This describes the Z-Wave device 09813, manufactured by Devolo with the thing type UID of devolo_09813_00_000.

Home Control Smoke Detector

Channels

The following table summarises the channels available for the 09813 Home Control Smoke Detector.

Channel Channel Id Channel Type UID Category Item Type
Binary Sensor sensor_binary sensor_binary Door Switch
Alarm (smoke) alarm_smoke alarm_smoke Door Switch
Alarm (burglar) alarm_burglar alarm_burglar Door Switch
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the 09813 Home Control Smoke Detector. Detailed information on each parameter can be found below.

Parameter Description
1: Alarm mode The value (255) activates the transmission of the alarm message
1: Alarm smoke is detected
2: Battery capacity low  

1: Alarm mode

The value (255) activates the transmission of the alarm message

Overview

….to the Z-Wave® controller. The value (0) disables the transmission of the alarm message.

Property Value
Configuration ID config_1_1
Data Type INTEGER
Range 1 to 255
Default Value 255

1: Alarm

smoke is detected

Overview

When smoke is detected, the Home Control Smoke Detector will send a message to the Z-Wave® controller.

Alarm version 1

Alarm type: 0x01

Alarm level: 0x00 (normal) 0xFF (Alarm)

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Battery capacity low

Overview

The Home Control Smoke Detector continuously checks the battery capacity. If the battery capacity falls below a defined value of approx. 2.7V +-0.1V, a low battery alarm will be sent via Z-Wave®. If the capacity continues falling, the visual and acoustic battery capacity warning will be activated additionally.

Property Value
Configuration ID group_2
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.