MT2652 Scene Switch

This describes the Z-Wave device MT2652, manufactured by Devolo with the thing type UID of devolo_mt2652_00_000.

Scene Switch

Channels

The following table summarises the channels available for the MT2652 Scene Switch.

Channel Channel Id Channel Type UID Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer
Scene Activation scene_number scene_number   Number
Scene Number scene_number scene_number   Number
  lock_door lock_door Door Switch
  battery-level system.battery-level    

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the MT2652 Scene Switch. Detailed information on each parameter can be found below.

Parameter Description
1: Button 1 and 3 pair mode Button 1 and 3 pair mode
2: Button 2 and 4 pair mode Button 2 and 4 pair mode
11: Command to control Group A Defines the command to be sent to devices of control group A when the related button is pr…
12: Command to control Group B Defines the command to be sent to devices of control group B when the related button is pr…
13: Command to control Group C Defines the command to be sent to devices of control group C when the related button is pr…
14: Command to control Group D Defines the command to be sent to devices of control group D when the related button is pr…
21: Send the following Switch All commands  
22: Invert buttons  
25: Block wake up even when Wake Up Interval is set  
30: Send unsolicited Battery Report on Wake Up  
1: Lifeline Z-Wave Plus Lifeline
2: Control Group A, controlled by button 1 or single clicks of buttons 1 Control Group A, controlled by button 1 or single clicks of buttons 1 and 3
3: Control Group B, controlled by button 2 or single clicks of buttons 2 Control Group B, controlled by button 2 or single clicks of buttons 2 and 4
4: Control Group C, controlled by button 3 or double clicks of buttons 1 Control Group C, controlled by button 3 or double clicks of buttons 1 and 3
5: Control Group D, controlled by button 4 or double clicks of buttons 2 Control Group D, controlled by button 4 or double clicks of buttons 2 and 4

1: Button 1 and 3 pair mode

Button 1 and 3 pair mode

Overview

In separate mode button 1 works with group 1, button 3 with groups 3. Click is On, Hold is dimming Up, Double click is Off, Click-Hold is dimming Down. In pair button 1/3 are Up/Down correspondingly. Click is On/Off, Hold is dimming Up/Down. Single clicks works with group 1, double click with group 3.

Property Value      
Configuration ID config_1_1      
Data Type INTEGER   Default Value 1
Options Separately (0)      
  In pair without double clicks (1)      
  In pair with double clicks (2)      

2: Button 2 and 4 pair mode

Button 2 and 4 pair mode

Overview

In separate mode button 2 works with group 2, button 4 with groups 4. Click is On, Hold is dimming Up, Double click is Off, Click-Hold is dimming Down. In pair button 2/4 are Up/Down correspondingly. Click is On/Off, Hold is dimming Up/Down. Single clicks works with group 2, double click with group 4.

Property Value      
Configuration ID config_2_1      
Data Type INTEGER   Default Value 1
Options Separately (0)      
  In pair without double clicks (1)      
  In pair with double clicks (2)      

11: Command to control Group A

Defines the command to be sent to devices of control group A when the related button is pressed.

Overview

In Switch On/Off only mode On command is sent on Dim Up, Off on Dim Down. In Scenes mode the scene ID sent is (10 * group + ActionID), where ActionID is: 1 = On, 2 = Off, 3 = Dim Up Start, 4 = Dim Down Start, 5 = Dim Up Stop, 6 = Dim Down Stop

Property Value      
Configuration ID config_11_1      
Data Type INTEGER   Default Value 8
Options Disabled (0)      
  Switch On/Off and Dim (send Basic Set and Switch Multilevel) (1)      
  Switch On/Off only (send Basic Set) (2)      
  Switch all (3)      
  Send Scenes (4)      
  Send Preconfigured Scenes (5)      
  Control devices in proximity (6)      
  Control door lock (7)      
  Central scene to gateway (default) (8)      

12: Command to control Group B

Defines the command to be sent to devices of control group B when the related button is pressed.

Overview

In Switch On/Off only mode On command is sent on Dim Up, Off on Dim Down. In Scenes mode the scene ID sent is (10 * group + ActionID), where ActionID is: 1 = On, 2 = Off, 3 = Dim Up Start, 4 = Dim Down Start, 5 = Dim Up Stop, 6 = Dim Down Stop

Property Value      
Configuration ID config_12_1      
Data Type INTEGER   Default Value 8
Options Disabled (0)      
  Switch On/Off and Dim (send Basic Set and Switch Multilevel) (1)      
  Switch On/Off only (send Basic Set) (2)      
  Switch all (3)      
  Send Scenes (4)      
  Send Preconfigured Scenes (5)      
  Control devices in proximity (6)      
  Control door lock (7)      
  Central scene to gateway (default) (8)      

13: Command to control Group C

Defines the command to be sent to devices of control group C when the related button is pressed.

Overview

In Switch On/Off only mode On command is sent on Dim Up, Off on Dim Down. In Scenes mode the scene ID sent is (10 * group + ActionID), where ActionID is: 1 = On, 2 = Off, 3 = Dim Up Start, 4 = Dim Down Start, 5 = Dim Up Stop, 6 = Dim Down Stop

Property Value      
Configuration ID config_13_1      
Data Type INTEGER   Default Value 8
Options Disabled (0)      
  Switch On/Off and Dim (send Basic Set and Switch Multilevel) (1)      
  Switch On/Off only (send Basic Set) (2)      
  Switch all (3)      
  Send Scenes (4)      
  Send Preconfigured Scenes (5)      
  Control devices in proximity (6)      
  Control door lock (7)      
  Central scene to gateway (default) (8)      

14: Command to control Group D

Defines the command to be sent to devices of control group D when the related button is pressed.

Overview

In Switch On/Off only mode On command is sent on Dim Up, Off on Dim Down. In Scenes mode the scene ID sent is (10 * group + ActionID), where ActionID is: 1 = On, 2 = Off, 3 = Dim Up Start, 4 = Dim Down Start, 5 = Dim Up Stop, 6 = Dim Down Stop

Property Value      
Configuration ID config_14_1      
Data Type INTEGER   Default Value 8
Options Disabled (0)      
  Switch On/Off and Dim (send Basic Set and Switch Multilevel) (1)      
  Switch On/Off only (send Basic Set) (2)      
  Switch all (3)      
  Send Scenes (4)      
  Send Preconfigured Scenes (5)      
  Control devices in proximity (6)      
  Control door lock (7)      
  Central scene to gateway (default) (8)      

21: Send the following Switch All commands

Property Value      
Configuration ID config_21_1      
Data Type INTEGER   Default Value 1
Options Switch off only (default) (1)      
  Switch on only (2)      
  Switch all on and off (255)      

22: Invert buttons

Property Value      
Configuration ID config_22_1      
Data Type INTEGER   Default Value 0
Options No (0)      
  Yes (1)      

25: Block wake up even when Wake Up Interval is set

Property Value      
Configuration ID config_25_1      
Data Type INTEGER   Default Value 1
Options Wake up is blocked (0)      
  Wakeup is not blocked (Default) (1)      

30: Send unsolicited Battery Report on Wake Up

Property Value      
Configuration ID config_30_1      
Data Type INTEGER   Default Value 0
Options No (0)      
  To same node as wake up notification (1)      
  Broadcast to neighbours (2)      

1: Lifeline

Z-Wave Plus Lifeline

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Control Group A, controlled by button 1 or single clicks of buttons 1

Control Group A, controlled by button 1 or single clicks of buttons 1 and 3

Property Value
Configuration ID group_2
Data Type TEXT
Range to

3: Control Group B, controlled by button 2 or single clicks of buttons 2

Control Group B, controlled by button 2 or single clicks of buttons 2 and 4

Property Value
Configuration ID group_3
Data Type TEXT
Range to

4: Control Group C, controlled by button 3 or double clicks of buttons 1

Control Group C, controlled by button 3 or double clicks of buttons 1 and 3

Property Value
Configuration ID group_4
Data Type TEXT
Range to

5: Control Group D, controlled by button 4 or double clicks of buttons 2

Control Group D, controlled by button 4 or double clicks of buttons 2 and 4

Property Value
Configuration ID group_5
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.