DCH-Z510 Siren

This describes the Z-Wave device DCH-Z510, manufactured by D-Link with the thing type UID of dlink_dchz510_00_000.

Siren

Inclusion Information

  1. Have Z-Wave Controller enter inclusion mode.
  2. Pressing tamper key three times within 1.5 seconds to enter the inclusion mode.
  3. After add successful, the LED will light ON 1 second 

Exclusion Information

  1. Have Z-Wave Controller enter exclusion mode.
  2. Pressing tamper key three times within 1.5 seconds to enter the exclusion mode.
  3. Node ID has been excluded. 

Channels

The following table summarises the channels available for the DCH-Z510 Siren.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Binary Sensor sensor_binary sensor_binary Door Switch
Start sound notification_send notification_send   Number

Device Configuration

The following table provides a summary of the configuration parameters available in the DCH-Z510 Siren. Detailed information on each parameter can be found below.

Parameter Description
7: Customer Function  
29: Disable Alarm  
31: Alarm Duration Play alarm sound duration, 1 tick is 30 seconds. 0 means never auto stop.
1: Report Messages The group 1 is for receiving the report message, like tamper event. This is the device’s L…

7: Customer Function

Property Value      
Configuration ID config_7_1_00000010      
Data Type INTEGER   Default Value 0
Options Using Notification Report (0)      
  Using Sensor Binary Report (16)      

29: Disable Alarm

Property Value      
Configuration ID config_29_1      
Data Type INTEGER   Default Value 0
Options Enable Alarm (0)      
  Disable Alarm (1)      

31: Alarm Duration

Play alarm sound duration, 1 tick is 30 seconds. 0 means never auto stop.

Property Value
Configuration ID config_31_1
Data Type INTEGER
Range 0 to 127
Default Value 0

1: Report Messages

The group 1 is for receiving the report message, like tamper event. This is the device’s Lifeline group. The group supports 8 nodes maximum.

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.