GR-105N Z-Wave Motor for water/gas ball valves

This describes the Z-Wave device GR-105N, manufactured by EcoNet Controls with the thing type UID of econet_gr105n_00_000.

Z-Wave Motor for water/gas ball valves

Overview

This valve clamps onto your existing valve, allowing you to open/close the valve via Z-Wave as soon as you notice a problem.

Inclusion Information

With controller in inclusion mode, triple-press valve button within 1 second to include.

Exclusion Information

With controller in exclusion mode, triple-press valve button within 1 second to exclude.

Holding the valve button for more than 10 seconds resets to factory default settings.

Channels

The following table summarises the channels available for the GR-105N Z-Wave Motor for water/gas ball valves.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch

Device Configuration

The following table provides a summary of the configuration parameters available in the GR-105N Z-Wave Motor for water/gas ball valves. Detailed information on each parameter can be found below.

Parameter Description
1: Group1  

1: Group1

Overview

Sends state updates when the valve is operated locally with the valve button.

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.