DMS01 Dome Wireless Siren

This describes the Z-Wave device DMS01, manufactured by Elexa Consumer Products Inc. with the thing type UID of elexa_dms01_00_000.

Dome Wireless Siren

Channels

The following table summarises the channels available for the DMS01 Dome Wireless Siren.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Alarm alarm_general alarm_general Door Switch
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the DMS01 Dome Wireless Siren. Detailed information on each parameter can be found below.

Parameter Description
1: Primary Notification Volume Level  
2: Primary Notification Length  
3: Secondary Notification Length  
4: Secondary Notification Volume Level  
5: Primary Notification Sound  
6: Secondary Notification Sound  
7: Toggle secondary chime Toggles between primary and secondary chime for binary switch

1: Primary Notification Volume Level

Property Value      
Configuration ID config_1_2      
Data Type INTEGER   Default Value 2
Options Low Volume (1)      
  Medium Volume (2)      
  High Volume (3)      

2: Primary Notification Length

Property Value      
Configuration ID config_2_2      
Data Type INTEGER   Default Value 2
Options 30 Seconds (1)      
  1 Minute (2)      
  5 Minutes (3)      
  Plays Until Battery Is Depleted (255)      

3: Secondary Notification Length

Property Value      
Configuration ID config_3_2      
Data Type INTEGER   Default Value 1
Options Does Not Stop (0)      
  1 Minute (1)      
  5 Minutes (5)      
  Chime Will Not Play (255)      

4: Secondary Notification Volume Level

Property Value      
Configuration ID config_4_2      
Data Type INTEGER   Default Value 2
Options Low Volume (1)      
  Medium Volume (2)      
  High Volume (3)      

5: Primary Notification Sound

Overview

The siren offers ten different sounds to use as the Siren (primary) notification. This parameter sets the Siren (primary) notification sound.

Property Value      
Configuration ID config_5_2      
Data Type INTEGER   Default Value 9
Options Ding dong (1)      
  Fur Elise (2)      
  Westminster Chime (3)      
  Dingdongdingdongdingdong (4)      
  William Tell Overture (5)      
  Classical (6)      
  Weeooeeooeeooeeoo (7)      
  Err-err-err-err-err (8)      
  Beepbeepbeepbeep (Default) (9)      
  beeeep-beeeep-beeeep (10)      

6: Secondary Notification Sound

Property Value      
Configuration ID config_6_2      
Data Type INTEGER   Default Value 9
Options Ding dong (1)      
  Fur Elise (2)      
  Westminster Chime (3)      
  Dingdongdingdongdingdong (4)      
  William Tell Overture (5)      
  Classical (6)      
  Weeooeeooeeooeeoo (7)      
  Err-err-err-err-err (8)      
  Beepbeepbeepbeep (Default) (9)      
  beeeep-beeeep-beeeep (10)      

7: Toggle secondary chime

Toggles between primary and secondary chime for binary switch

Property Value      
Configuration ID config_7_2      
Data Type INTEGER   Default Value 1
Options Primary notification will play (1)      
  Secondary notification will play (2)      

Did you spot an error in the above definition or want to improve the content? You can edit the database here.