The openHAB Documentation Has Moved

The documentation has moved to openhab.org/docs and openhab.org/addons.

Please use the link below to be redirected to the new version of this article, and update your bookmarks.

Plug-In Smart Meter Dimmer Switch ZWN323M

This describes the Z-Wave device Plug-In Smart Meter Dimmer Switch, manufactured by Wenzhou MTLC Electric Appliances Co.,Ltd. with the thing type UID of enerwave_zwn323m_00_000.

The Plug-In Smart Meter Dimmer Switch supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data from other devices.

Overview

No device information is provided in the database. Consider updating the database to improve the documentation.

Channels

The following table summarises the channels available for the Plug-In Smart Meter Dimmer Switch -:

Channel Channel Id Category Item Type
Switch switch_binary Switch Switch
Dimmer switch_dimmer DimmableLight Dimmer
Sensor (power) sensor_power Energy Number
Electric meter (watts) meter_watts Energy Number
Electric meter (kWh) meter_kwh Energy Number

Switch

Switch the power on and off.

The switch_binary channel supports the Switch item and is in the Switch category.

Dimmer

The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.

The switch_dimmer channel supports the Dimmer item and is in the DimmableLight category.

Sensor (power)

Indicates the energy consumption (kWh).

The sensor_power channel supports the Number item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.

Electric meter (watts)

Indicates the instantaneous power consumption.

The meter_watts channel supports the Number item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.

Electric meter (kWh)

Indicates the energy consumption (kWh).

The meter_kwh channel supports the Number item and is in the Energy category. This is a read only channel so will only be updated following state changes from the device.

Device Configuration

The following table provides a summary of the 6 configuration parameters available in the Plug-In Smart Meter Dimmer Switch. Detailed information on each parameter can be found in the sections below.

Param Name Description
1   Synchronization of load power and LED indicator
8   Instant Energy Autosend Interval (send METER_REPORT)
9   Instant Energy Autosend interval (send SENSOR_MULTILEVEL_REPORT)
10   Accumulated Energy Autosend Interval report (send METER_REPORT)
11   Enable automatic notifications to associated device
12   Minimum change in wattage report
  Switch All Mode Set the mode for the switch when receiving SWITCH ALL commands

Parameter 1:

Synchronization of load power and LED indicator

The following option values may be configured -:

Value Description
0 Power on, LED off
1 Power on, LED on

The manufacturer defined default value is 0 (Power on, LED off).

This parameter has the configuration ID config_1_1 and is of type INTEGER.

Parameter 8:

Instant Energy Autosend Interval (send METER_REPORT)

Values in the range 0 to 255 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_8_1 and is of type INTEGER.

Parameter 9:

Instant Energy Autosend interval (send SENSOR_MULTILEVEL_REPORT)

Values in the range 0 to 255 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_9_1 and is of type INTEGER.

Parameter 10:

Accumulated Energy Autosend Interval report (send METER_REPORT)

Values in the range 0 to 255 may be set.

The manufacturer defined default value is 0.

This parameter has the configuration ID config_10_1 and is of type INTEGER.

Parameter 11:

Enable automatic notifications to associated device Device will send a notification whenever the is a wattage change The following option values may be configured -:

Value Description
0 Not report (METER_REPORT)
1 Send (METER_REPORT) only
2 Send (SENSOR_MULTI_LEVEL_REPORT) only
3 Send both

The manufacturer defined default value is 1 (Send (METER_REPORT) only).

This parameter has the configuration ID config_11_1 and is of type INTEGER.

Parameter 12:

Minimum change in wattage report 0-255: 0.0-25.5W Values in the range 0 to 255 may be set.

The manufacturer defined default value is 10.

This parameter has the configuration ID config_12_1 and is of type INTEGER.

Switch All Mode

Set the mode for the switch when receiving SWITCH ALL commands.

The following option values may be configured -: | Value | Description | |——–|————-| | 0 | Exclude from All On and All Off groups | | 1 | Include in All On group | | 2 | Include in All Off group | | 255 | Include in All On and All Off groups |

This parameter has the configuration ID switchall_mode and is of type INTEGER.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The Plug-In Smart Meter Dimmer Switch supports 3 association groups.

Group 1: Notifications

Lifeline This group supports 1 nodes.

Group 2: StatusReport

Send basic report This group supports 5 nodes.

Group 3: PowerReport

PowerReport: Send meter power report This group supports 5 nodes.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1  
COMMAND_CLASS_BASIC_V1  
COMMAND_CLASS_SWITCH_BINARY_V1  
COMMAND_CLASS_SWITCH_MULTILEVEL_V1 Linked to BASIC
COMMAND_CLASS_SWITCH_ALL_V1  
COMMAND_CLASS_SENSOR_MULTILEVEL_V2  
COMMAND_CLASS_METER_V2  
COMMAND_CLASS_CONFIGURATION_V1  
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1  
COMMAND_CLASS_ASSOCIATION_V1  
COMMAND_CLASS_VERSION_V1  

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.