ZW20R 20A Tamper Resistant Duplex Receptacle

This describes the Z-Wave device ZW20R, manufactured by Wenzhou MTLC Electric Appliances Co.,Ltd. with the thing type UID of enerwave_zw20r_00_000.

20A Tamper Resistant Duplex Receptacle

Inclusion Information

When the controller is in inclusion mode and the blue LED blinks on the
ZW20R, press the program button of ZW20R, and then the controller will
verify the inclusion

Exclusion Information

When the controller is in exclusion mode, press the
program button of ZW20R, and then the controller will remove it from the
current Z-Wave network, and the LED will blink on the receptacle.

Wakeup Information

mains device

Channels

The following table summarises the channels available for the ZW20R 20A Tamper Resistant Duplex Receptacle.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Switch 1 switch_binary1 switch_binary Switch Switch
Switch 2 switch_binary2 switch_binary Switch Switch

Device Configuration

The following table provides a summary of the configuration parameters available in the ZW20R 20A Tamper Resistant Duplex Receptacle. Detailed information on each parameter can be found below.

Parameter Description
1: Toggle LED mode Set to 1 for LED to be in sync with switch.

1: Toggle LED mode

Set to 1 for LED to be in sync with switch.

Property Value      
Configuration ID config_1_1      
Data Type INTEGER   Default Value 0
Options 0: LED is on when switch is off (0)      
  1: LED is on when switch is on (1)      

Did you spot an error in the above definition or want to improve the content? You can edit the database here.