ZWM-RSM1 Smart Single Relay Switch Module

This describes the Z-Wave device ZWM-RSM1, manufactured by Wenzhou MTLC Electric Appliances Co.,Ltd. with the thing type UID of enerwave_zwmrsm1_00_000.

Smart Single Relay Switch Module

Overview

Z-Wave unifies all your home electronics into an integrated wireless network and helps them talk to each other. It can be added to the network, and making your home electronics fully compatible. The ZWN-RSM1 Switch Module is a component of lighting control system, it can’t be used separately but should turn an existing switch into a Z-Wave switch. This ZWN-RSM1 module is a Z-Wave enabled device and fully interoperable with other Z-Wave certified device from other manufacturers and/or other applications. In a Z-Wave network, each device is designed to act as a wireless repeater. Once the ZWN-RSM1 module is installed and setup with in your wall, it will retransmit the RF signal from one device to another until the intended device is reached. This ensures that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots.  

Inclusion Information

. When the controller is in add mode, and once program button is pressed and release, or Flick 3 times of the connected switch in 1.5S will also set the ZWN-RSM1 module enter into learn mode . and then the controller will verify the add.

Exclusion Information

When the controller is in remove mode, and once program button is pressed and release, or Flick 3 times of the connected switch in 1.5S will also set the ZWN-RSM1 module enter into learn mode . and then the controller will verify the remove.

Channels

The following table summarises the channels available for the ZWM-RSM1 Smart Single Relay Switch Module.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch

Device Configuration

The following table provides a summary of the configuration parameters available in the ZWM-RSM1 Smart Single Relay Switch Module. Detailed information on each parameter can be found below.

Parameter Description
1: Lifeline Lifeline: Send device reset locally notification
2: StatusReport StatusReport: Send basic report

1: Lifeline

Lifeline: Send device reset locally notification

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: StatusReport

StatusReport: Send basic report

Property Value
Configuration ID group_2
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.