ZWN-RSM2 Smart Dual Relay Switch Module

This describes the Z-Wave device ZWN-RSM2, manufactured by Wenzhou MTLC Electric Appliances Co.,Ltd. with the thing type UID of enerwave_zwnrsm2_00_000.

Smart Dual Relay Switch Module

Channels

The following table summarises the channels available for the ZWN-RSM2 Smart Dual Relay Switch Module.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Switch 1 switch_binary1 switch_binary Switch Switch
Switch 2 switch_binary2 switch_binary Switch Switch

Device Configuration

The following table provides a summary of the configuration parameters available in the ZWN-RSM2 Smart Dual Relay Switch Module. Detailed information on each parameter can be found below.

Parameter Description
3: Unsolicited Report Configuration ZWN-RSM2 can send unsolicited status report to primary controller (Node ID 0X01) when swit…

3: Unsolicited Report Configuration

ZWN-RSM2 can send unsolicited status report to primary controller (Node ID 0X01) when switch toggled due to some controllers designed as gateway. If your controller is not a gateway or does not need the status or you think it could confuse your Z-Wave net

Property Value
Configuration ID config_3_1
Data Type INTEGER
Range 0 to 255
Default Value 0

Did you spot an error in the above definition or want to improve the content? You can edit the database here.