Spirit Thermostatic Valve

This describes the Z-Wave device Spirit, manufactured by Eurotronics with the thing type UID of eurotronic_spirit_00_000.

Thermostatic Valve

Overview

Intelligenter Energiesparregler für Z-Wave mit wechselbaren Designblenden.

Die neue Energiesparreglerserie von EUROtronic steht für ein völlig neues Designkonzept. Mit wechselbare Designblenden (als Zubehör erhältlich) kann der smarte Heizkörperthermostat an den individuellen Einrichtungsgeschmack angepasst werden.

Nutzern von Z-Wave bietet der neue Spirit-Z-Wave eine Vielzahl neuer Funktionen.

Ausgestattet mit FLiRS (Frequently Listening Receiver Slave) reagiert der Energiesparregler mit einer besonders kurzen Latenzzeit auf eingehende Befehle (z.B. Temperaturänderungen).
Sein farbiges Display ist besonders gut ablesbar und hat eine extragroße Temperaturanzeige.
Durch die per LED mehrfarbig beleuchtete Mitteltaste ist eine intuitive Nutzerführung möglich, da der Nutzer durch farbige Blinkfolgen zur Interaktion mit dem Gerät aufgefordert wird.

Inclusion Information

Start Inclusion mode of your primary Z-Wave Controller. Press the Boost-Button. Spirit Z-Wave Plus will show the assigned NodeID.

Exclusion Information

Start Exclusion mode of your primary Z-Wave Controller. Now press and hold the boost button of the Spirit Z-Wave Plus for at least 5 seconds.

Channels

The following table summarises the channels available for the Spirit Thermostatic Valve.

Channel Channel Id Channel Type UID Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer
Current temperature sensor_temperature sensor_temperature Temperature Number
External temperature sensor_report sensor_report    
Thermostat mode thermostat_mode eurotronic_spirit_00_000_thermostat_mode Temperature Number
Setpoint (heat) thermostat_setpoint_heating thermostat_setpoint Temperature Number
Setpoint (energy heat) thermostat_setpoint_furnace thermostat_setpoint Temperature Number
Alarm (system) alarm_system alarm_system   Switch
Alarm (power) alarm_power alarm_power Door Switch
  battery-level system.battery-level    

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Current temperature

Scale

Select the scale for temperature readings

Property Value      
Configuration ID config_scale      
Data Type TEXT   Default Value 0
Options Celsius (0)      
  Fahrenheit (1)      

Setpoint (heat)

Scale

Select the scale to use for setpoints.

Property Value      
Configuration ID config_scale      
Data Type TEXT   Default Value 0
Options Celsius (0)      
  Fahrenheit (1)      

Setpoint (energy heat)

Scale

Select the scale to use for setpoints.

Property Value      
Configuration ID config_scale      
Data Type TEXT   Default Value 0
Options Celsius (0)      
  Fahrenheit (1)      

Device Configuration

The following table provides a summary of the configuration parameters available in the Spirit Thermostatic Valve. Detailed information on each parameter can be found below.

Parameter Description
1: LCD Invert LCD Invert
2: LCD Timeout LCD Timeout
3: Backlight Backlight
4: Battery report Battery report
5: Measured Temperature report Measured Temperature report
6: Valve opening percentage report Valve opening percentage report
7: Window open detection Window open detection
8: Measured Temperature offset Measured Temperature offset
1: Lifeline Spirit Z-Wave Plus can only be associated with the Z-Wave controller.

1: LCD Invert

LCD Invert

Property Value      
Configuration ID config_1_1      
Data Type INTEGER   Default Value 0
Options LCD-content normal (0)      
  LCD-content inverted (UK Edition) (1)      

2: LCD Timeout

LCD Timeout

Overview

0: No Timeout LCD always on

5-30: LCD will turn off after 5 to 30 seconds

Property Value      
Configuration ID config_2_1      
Data Type INTEGER      
Range 5 to 30   Default Value 0
Options No Timeout LCD always on (0)      

3: Backlight

Backlight

Property Value      
Configuration ID config_3_1      
Data Type INTEGER   Default Value 1
Options Backlight disabled (0)      
  Backlight enabled (1)      

4: Battery report

Battery report

Property Value      
Configuration ID config_4_1      
Data Type INTEGER   Default Value 1
Options system notification (0)      
  Send battery status unsolicited once a day. (1)      

5: Measured Temperature report

Measured Temperature report

Overview

0: Unsolicited Temperature reporting disabled

1-50: report if temperature changed by delta = 0,1°C … 5,0 °C

default 5: report on delta T = 0,5°C

Property Value
Configuration ID config_5_1
Data Type INTEGER
Range 0 to 50
Default Value 5

6: Valve opening percentage report

Valve opening percentage report

Overview

0: Unsolicited valve opening percentage reporting disabled.

1-100: report if valve opening changed by delta = 1% … 100%

Property Value
Configuration ID config_6_1
Data Type INTEGER
Range 0 to 100
Default Value 0

7: Window open detection

Window open detection

Property Value      
Configuration ID config_7_1      
Data Type INTEGER   Default Value 2
Options Disabled (0)      
  Sensitivity low (1)      
  Sensitivity medium (2)      
  Sensitivity high (3)      

8: Measured Temperature offset

Measured Temperature offset

Overview

-50 - +50: Offsets the measured temperature by-5,0°C – (+)5,0°C

128: External temperature sensor will be used for regulation.

Property Value      
Configuration ID config_8_1      
Data Type INTEGER      
Range -50 to 50   Default Value 0
Options External temperature sensor will be used for regulation. (128)      

1: Lifeline

Spirit Z-Wave Plus can only be associated with the Z-Wave controller.

Overview

Commands:

BATTERY_REPORT, DEVICE_RESET_LOCALLY_NOTIFICATION, THERMOSTAT_MODE_REPORT, THERMOSTAT_SETPOINT_REPORT, NOTIFICATION_REPORT, PROTECTION_REPORT, SENSOR_MULTILEVEL_REPORT, SWITCH_MULTILEVEL_REPORT

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.