AD142 Indoor Dimmer Plug

This describes the Z-Wave device AD142, manufactured by Everspring with the thing type UID of everspring_ad142_00_000.

Indoor Dimmer Plug

Overview

This plug-in Lamp Module is a transceiver which is a Z-Wave enabled device and is fully compatible with any Z-Wave enabled network. Z-Wave enabled devices displaying the Z-Wave logo can also be used with it regardless of the manufacturer, and ours can also be used in other manufacturer’s Z-Wave enabled networks.  Inclusion of the Lamp module on other manufacturer’s Wireless Controller menu allows remote On/Off control and dimming of lamps connected.  Each module is designed to act as a repeater.  Repeaters will re-transmit the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots.

Channels

The following table summarises the channels available for the AD142 Indoor Dimmer Plug.

Channel Channel Id Channel Type UID Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the AD142 Indoor Dimmer Plug. Detailed information on each parameter can be found below.

| Parameter | Description | |————-|————-|


Did you spot an error in the above definition or want to improve the content? You can edit the database here.