AD146 In-Wall Dimmer Module

This describes the Z-Wave device AD146, manufactured by Everspring with the thing type UID of everspring_ad146_00_000.

In-Wall Dimmer Module

Channels

The following table summarises the channels available for the AD146 In-Wall Dimmer Module.

Channel Channel Id Channel Type UID Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer
Alarm (power) alarm_power alarm_power Door Switch

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the AD146 In-Wall Dimmer Module. Detailed information on each parameter can be found below.

Parameter Description
1: Basic Set Command value Basic Set Command value. 0-99, 255
2: Report time delay group 1 Delaying time to report to group 1.
3: Remember last status Remember last status after power loss.
4: Switching type Edge or toogle switch mode.
5: Output mode setting Dimming or On/Off Switch
1: Reports  
2: Control  

1: Basic Set Command value

Basic Set Command value. 0-99, 255

Property Value
Configuration ID config_1_2
Data Type INTEGER
Range 0 to 255
Default Value 255

2: Report time delay group 1

Delaying time to report to group 1.

Property Value
Configuration ID config_2_1
Data Type INTEGER
Range 3 to 25
Default Value 3

3: Remember last status

Remember last status after power loss.

Property Value      
Configuration ID config_3_1      
Data Type INTEGER   Default Value 1
Options Do not remember (0)      
  Remember (1)      

4: Switching type

Edge or toogle switch mode.

Property Value      
Configuration ID config_4_1      
Data Type INTEGER   Default Value 0
Options Edge Mode (0)      
  Toogle Mode (1)      

5: Output mode setting

Dimming or On/Off Switch

Property Value      
Configuration ID config_5_1      
Data Type INTEGER   Default Value 0
Options Dimming (0)      
  On/Off (1)      

1: Reports

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Control

Property Value
Configuration ID group_2
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.