AN179 In-Wall Switch Module

This describes the Z-Wave device AN179, manufactured by Everspring with the thing type UID of everspring_an179_00_000.

In-Wall Switch Module

Channels

The following table summarises the channels available for the AN179 In-Wall Switch Module.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Alarm (power) alarm_power alarm_power Door Switch

Device Configuration

The following table provides a summary of the configuration parameters available in the AN179 In-Wall Switch Module. Detailed information on each parameter can be found below.

Parameter Description
1: Basic Set Command value Basic Set Command value. 0-99, 255
2: Report time delay group 1 Delaying time to report to group 1.
3: Remember last status Remember last status after power loss.
4: Switching type Edge or toogle switch mode.
1: Reports  
2: Control  

1: Basic Set Command value

Basic Set Command value. 0-99, 255

Property Value
Configuration ID config_1_2
Data Type INTEGER
Range 0 to 255
Default Value 255

2: Report time delay group 1

Delaying time to report to group 1.

Property Value
Configuration ID config_2_1
Data Type INTEGER
Range 3 to 25
Default Value 3

3: Remember last status

Remember last status after power loss.

Property Value      
Configuration ID config_3_1      
Data Type INTEGER   Default Value 1
Options Do not remember (0)      
  Remember (1)      

4: Switching type

Edge or toogle switch mode.

Property Value      
Configuration ID config_4_1      
Data Type INTEGER   Default Value 0
Options Edge Mode (0)      
  Toogle Mode (1)      

1: Reports

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Control

Property Value
Configuration ID group_2
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.