HSP02 Motion Detector

This describes the Z-Wave device HSP02, manufactured by Everspring with the thing type UID of everspring_hsp02_00_000.

Motion Detector

Channels

The following table summarises the channels available for the HSP02 Motion Detector.

Channel Channel Id Channel Type UID Category Item Type
Binary Sensor sensor_binary sensor_binary Door Switch
Alarm alarm_general alarm_general Door Switch
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the HSP02 Motion Detector. Detailed information on each parameter can be found below.

Parameter Description
1: Basic Set Level Value to be sent with a BASIC SET command
2: Sensor Detecting Function  
3: Sensitivity Level  
4: Re-trigger Interval Setting  
5: LUX Level Value for what LUX level will arm the detection sensor
6: On-Off Duration  
1: Target for reports  
2: Target nodes who receive BASIC_SET command  

1: Basic Set Level

Value to be sent with a BASIC SET command

Property Value
Configuration ID config_1_1
Data Type INTEGER
Range 0 to 99
Default Value 99

2: Sensor Detecting Function

Property Value      
Configuration ID config_2_1      
Data Type INTEGER   Default Value 1
Options Group 1 Enabled / Group 2 Enabled (1)      
  Group 1 Enabled / Group 2 Disabled (2)      
  Group 1 Disabled / Group 2 Disabled (3)      

3: Sensitivity Level

Property Value
Configuration ID config_3_1
Data Type INTEGER
Range 1 to 10
Default Value 6

4: Re-trigger Interval Setting

Property Value
Configuration ID config_4_1
Data Type INTEGER
Range 5 to 255
Default Value 180

5: LUX Level

Value for what LUX level will arm the detection sensor

Property Value
Configuration ID config_5_1
Data Type INTEGER
Range 1 to 100
Default Value 10

6: On-Off Duration

Property Value
Configuration ID config_6_1
Data Type INTEGER
Range 5 to 255
Default Value 15

1: Target for reports

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Target nodes who receive BASIC_SET command

Property Value
Configuration ID group_2
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.