SP103 Motion Detector

This describes the Z-Wave device SP103, manufactured by Everspring with the thing type UID of everspring_sp103_00_000.

Motion Detector

Channels

The following table summarises the channels available for the SP103 Motion Detector.

Channel Channel Id Channel Type UID Category Item Type
Binary Sensor sensor_binary sensor_binary Door Switch
Alarm alarm_general alarm_general Door Switch
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the SP103 Motion Detector. Detailed information on each parameter can be found below.

Parameter Description
1: Phase level on command Defines which command to send when sensor triggers
2: Enable/Disable Sleeping Enables/Disables sleeping for debug purposes
1: Triggered Report  

1: Phase level on command

Defines which command to send when sensor triggers

Property Value      
Configuration ID config_1_1      
Data Type INTEGER   Default Value 0
Options Set OFF (0)      
  Set ON (1)      
  Set LAST Level (9)      

2: Enable/Disable Sleeping

Enables/Disables sleeping for debug purposes

Property Value      
Configuration ID config_2_1      
Data Type INTEGER   Default Value 1
Options Disabled (0)      
  Enabled (1)      

1: Triggered Report

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.