The openHAB Documentation Has Moved

The documentation has moved to openhab.org/docs and openhab.org/addons.

Please use the link below to be redirected to the new version of this article, and update your bookmarks.

LTM-5 Wall Mount Accessory Switch

This describes the Z-Wave device LTM-5, manufactured by Evolve with the thing type UID of evolve_ltm5_00_000.

The LTM-5 supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data from other devices.

Overview

No device information is provided in the database. Consider updating the database to improve the documentation.

Channels

The following table summarises the channels available for the LTM-5 -:

Channel Channel Id Category Item Type
Switch switch_binary Switch Switch
Dimmer switch_dimmer DimmableLight Dimmer

Switch

Switch the power on and off.

The switch_binary channel supports the Switch item and is in the Switch category.

Dimmer

The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.

The switch_dimmer channel supports the Dimmer item and is in the DimmableLight category.

Device Configuration

The following table provides a summary of the 7 configuration parameters available in the LTM-5. Detailed information on each parameter can be found in the sections below.

Param Name Description
1 Ignore Start Level (Transmitting) Dimmers controlled by this switch will start dimming from their current level.
3 Night Light In night-light mode the LED on the switch will turn ON when the switch is turned OFF.
4 Invert Switch Change the top of the switch to OFF and the bottom of the switch to ON.
5 Ignore Start-Level (Receiving) The dimmer will start dimming from its current level.
19 Transmission Indication Flicker LED while transmitting.
20 Polling Interval How often, in minutes, to poll to keep synchronized with group.
21 Poll First Node Poll only the first node in Group 1.
  Switch All Mode Set the mode for the switch when receiving SWITCH ALL commands

Parameter 1: Ignore Start Level (Transmitting)

Dimmers controlled by this switch will start dimming from their current level.

The following option values may be configured -:

Value Description
0 No
1 Yes

The manufacturer defined default value is 1 (Yes).

This parameter has the configuration ID config_1_1 and is of type INTEGER.

Parameter 3: Night Light

In night-light mode the LED on the switch will turn ON when the switch is turned OFF.

The following option values may be configured -:

Value Description
0 No
1 Yes

The manufacturer defined default value is 1 (Yes).

This parameter has the configuration ID config_3_1 and is of type INTEGER.

Parameter 4: Invert Switch

Change the top of the switch to OFF and the bottom of the switch to ON.

The following option values may be configured -:

Value Description
0 No
1 Yes

The manufacturer defined default value is 0 (No).

This parameter has the configuration ID config_4_1 and is of type INTEGER.

Parameter 5: Ignore Start-Level (Receiving)

The dimmer will start dimming from its current level.

The following option values may be configured -:

Value Description
0 No
1 Yes

The manufacturer defined default value is 1 (Yes).

This parameter has the configuration ID config_5_1 and is of type INTEGER.

Parameter 19: Transmission Indication

Flicker LED while transmitting.

The following option values may be configured -:

Value Description
0 No Flicker
1 Flicker Whole Transmission
2 Flicker 1 Second

The manufacturer defined default value is 2 (Flicker 1 Second).

This parameter has the configuration ID config_19_1 and is of type INTEGER.

Parameter 20: Polling Interval

How often, in minutes, to poll to keep synchronized with group.

Values in the range 1 to 255 may be set.

The manufacturer defined default value is 2.

This parameter has the configuration ID config_20_1 and is of type INTEGER.

Parameter 21: Poll First Node

Poll only the first node in Group 1.

The following option values may be configured -:

Value Description
0 No
1 Yes

The manufacturer defined default value is 0 (No).

This parameter has the configuration ID config_21_1 and is of type INTEGER.

Switch All Mode

Set the mode for the switch when receiving SWITCH ALL commands.

The following option values may be configured -: | Value | Description | |——–|————-| | 0 | Exclude from All On and All Off groups | | 1 | Include in All On group | | 2 | Include in All Off group | | 255 | Include in All On and All Off groups |

This parameter has the configuration ID switchall_mode and is of type INTEGER.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The LTM-5 supports 1 association group.

Group 1: Group 1

This group supports 5 nodes.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1  
COMMAND_CLASS_BASIC_V1  
COMMAND_CLASS_SWITCH_BINARY_V1  
COMMAND_CLASS_SWITCH_MULTILEVEL_V1  
COMMAND_CLASS_SWITCH_ALL_V1  
COMMAND_CLASS_CONFIGURATION_V1  
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1  
COMMAND_CLASS_ASSOCIATION_V1  
COMMAND_CLASS_VERSION_V1  
COMMAND_CLASS_INDICATOR_V1  

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.