LRM-AS Wall Mounted Dimmer

This describes the Z-Wave device LRM-AS, manufactured by Evolve with the thing type UID of evolve_lrmas_00_000.

Wall Mounted Dimmer

Channels

The following table summarises the channels available for the LRM-AS Wall Mounted Dimmer.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer
Binary Sensor sensor_binary sensor_binary Door Switch
Alarm alarm_general alarm_general Door Switch
  battery-level system.battery-level    

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the LRM-AS Wall Mounted Dimmer. Detailed information on each parameter can be found below.

Parameter Description
3: Night Light In night-light mode the LED will turn ON when the switch is turned OFF.
4: Invert Switch Change the top of the switch to OFF and the bottom of the switch to ON.
29: Load Sense  
1: Group 1  

3: Night Light

In night-light mode the LED will turn ON when the switch is turned OFF.

Property Value      
Configuration ID config_3_1      
Data Type INTEGER   Default Value 1
Options No (0)      
  Yes (1)      

4: Invert Switch

Change the top of the switch to OFF and the bottom of the switch to ON.

Property Value      
Configuration ID config_4_1      
Data Type INTEGER   Default Value 0
Options No (0)      
  Yes (1)      

29: Load Sense

Property Value      
Configuration ID config_29_1      
Data Type INTEGER   Default Value 0
Options Disable (0)      
  Enable (1)      

1: Group 1

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.