LTM-5 Wall Mount Accessory Switch

This describes the Z-Wave device LTM-5, manufactured by Evolve with the thing type UID of evolve_ltm5_00_000.

Wall Mount Accessory Switch

Channels

The following table summarises the channels available for the LTM-5 Wall Mount Accessory Switch.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the LTM-5 Wall Mount Accessory Switch. Detailed information on each parameter can be found below.

Parameter Description
1: Ignore Start Level (Transmitting) Dimmers controlled by this switch will start dimming from their current level.
3: Night Light In night-light mode the LED on the switch will turn ON when the switch is turned OFF.
4: Invert Switch Change the top of the switch to OFF and the bottom of the switch to ON.
5: Ignore Start-Level (Receiving) The dimmer will start dimming from its current level.
19: Transmission Indication Flicker LED while transmitting.
20: Polling Interval How often, in minutes, to poll to keep synchronized with group.
21: Poll First Node Poll only the first node in Group 1.
1: Group 1  

1: Ignore Start Level (Transmitting)

Dimmers controlled by this switch will start dimming from their current level.

Property Value      
Configuration ID config_1_1      
Data Type INTEGER   Default Value 1
Options No (0)      
  Yes (1)      

3: Night Light

In night-light mode the LED on the switch will turn ON when the switch is turned OFF.

Property Value      
Configuration ID config_3_1      
Data Type INTEGER   Default Value 1
Options No (0)      
  Yes (1)      

4: Invert Switch

Change the top of the switch to OFF and the bottom of the switch to ON.

Property Value      
Configuration ID config_4_1      
Data Type INTEGER   Default Value 0
Options No (0)      
  Yes (1)      

5: Ignore Start-Level (Receiving)

The dimmer will start dimming from its current level.

Property Value      
Configuration ID config_5_1      
Data Type INTEGER   Default Value 1
Options No (0)      
  Yes (1)      

19: Transmission Indication

Flicker LED while transmitting.

Property Value      
Configuration ID config_19_1      
Data Type INTEGER   Default Value 2
Options No Flicker (0)      
  Flicker Whole Transmission (1)      
  Flicker 1 Second (2)      

20: Polling Interval

How often, in minutes, to poll to keep synchronized with group.

Property Value
Configuration ID config_20_1
Data Type INTEGER
Range 1 to 255
Default Value 2

21: Poll First Node

Poll only the first node in Group 1.

Property Value      
Configuration ID config_21_1      
Data Type INTEGER   Default Value 0
Options No (0)      
  Yes (1)      

1: Group 1

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.