The openHAB Documentation Has Moved

The documentation has moved to and

Please use the link below to be redirected to the new version of this article, and update your bookmarks.

ARZ Solar Roller Shutter

This describes the Z-Wave device ARZ Solar, manufactured by Fakro with the thing type UID of fakro_arzsolar_00_000.

The device is in the category of Blinds, defining Roller shutters, window blinds, etc..

ARZ Solar product image

The ARZ Solar supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is unable to participate in the routing of data from other devices.


Roller shutter controlled by a remote control. Solar roller shutter is equipped with a control unit and accumulator. The accumulator is powered by a solar cell placed on the roller shutter. Recommended for places with no access to 230V supply.

Inclusion Information

Start INCLUDE procedure with the controller of existing network and then press programming button P on the roller shutter being added to the network.

Exclusion Information

Start EXCLUDE procedure with the controller of existing network and then press programming button P on the roller shutter being added to the network.


The following table summarises the channels available for the ARZ Solar -:

Channel Channel Id Category Item Type
Switch switch_binary Switch Switch
Dimmer switch_dimmer DimmableLight Dimmer
Battery Level battery-level Battery Number


Switch the power on and off.

The switch_binary channel supports the Switch item and is in the Switch category.


The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.

The switch_dimmer channel supports the Dimmer item and is in the DimmableLight category.

Battery Level

Represents the battery level as a percentage (0-100%). Bindings for things supporting battery level in a different format (e.g. 4 levels) should convert to a percentage to provide a consistent battery level reading.

The battery-level channel supports the Number item and is in the Battery category.

Device Configuration

The device has no configuration parameters configured.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The device does not support associations.

Technical Information


Endpoint 0

Command Class Comment

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.