VMZ Solar Awning Blind

This describes the Z-Wave device VMZ Solar, manufactured by Fakro with the thing type UID of fakro_vmzsolar_00_000.

Awning Blind

Channels

The following table summarises the channels available for the VMZ Solar Awning Blind.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Blinds control blinds_control blinds_control Blinds Rollershutter
  battery-level system.battery-level    

Blinds control

Invert control

Invert the blinds control

Property Value      
Configuration ID config_invert_control      
Data Type BOOLEAN   Default Value false
Options Yes (true)      
  No (false)      

Invert percentage value

Invert the blinds percentage value

Property Value      
Configuration ID config_invert_percent      
Data Type BOOLEAN   Default Value false
Options Yes (true)      
  No (false)      

Step duration

Sets the dim rate speed
Values from 1 to 127 are defined in seconds, while values from 128 to 254 are defined in minutes.

Property Value      
Configuration ID config_duration      
Data Type INTEGER      
Range 1 to 254   Default Value 255
Options Device Default (255)      
  Change Instantly (0)      

Device Configuration

The following table provides a summary of the configuration parameters available in the VMZ Solar Awning Blind. Detailed information on each parameter can be found below.

Parameter Description
1: mode operating mode
2: winter mode Summer/Winter mode
3: Measurement frequency Measurement frequency
4: Level of sensitivity for day Level of sensitivity for day
5: Temperature Temperature
6: Level of sensitivity for night Level of sensitivity for night

1: mode

operating mode

Overview

Operating mode. Available values:

0 - manual

1 - semiauto

2 - auto

Property Value      
Configuration ID config_1_1      
Data Type INTEGER   Default Value 1
Options manual (0)      
  semiauto (1)      
  auto (2)      

2: winter mode

Summer/Winter mode

Overview

Summer / Winter mode

50 - Auto (summer / winter mode)

0 - summer mode only

Property Value      
Configuration ID config_2_1      
Data Type INTEGER   Default Value 50
Options summer mode only (0)      
  Auto (summer / winter mode) (50)      

3: Measurement frequency

Measurement frequency

Property Value
Configuration ID config_3_1
Data Type INTEGER
Range 1 to 30
Default Value 3

4: Level of sensitivity for day

Level of sensitivity for day

Property Value
Configuration ID config_4_1
Data Type INTEGER
Range 1 to 99
Default Value 60

5: Temperature

Temperature

Property Value
Configuration ID config_5_1
Data Type INTEGER
Range 0 to 255
Default Value 0

6: Level of sensitivity for night

Level of sensitivity for night

Property Value
Configuration ID config_6_1
Data Type INTEGER
Range 1 to 9
Default Value 3

Did you spot an error in the above definition or want to improve the content? You can edit the database here.