FGD211 Universal Dimmer 500W

This describes the Z-Wave device FGD211, manufactured by Fibargroup with the thing type UID of fibaro_fgd211_00_000.

Universal Dimmer 500W

Channels

The following table summarises the channels available for the FGD211 Universal Dimmer 500W.

Channel Channel Id Channel Type UID Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the FGD211 Universal Dimmer 500W. Detailed information on each parameter can be found below.

Parameter Description
1: Enable/Disable ALL ON/OFF Activate/Deactive ALL ON/OFF
6: Separation of association sending (key 1) Activate/Deactivate association sending for group 1 - Also see param #16
7: Control key #2 behaviour Key no.2 is not represented by any physical device - only devices in the association list….
8: Dimming step at automatic control  
9: Time of MANUALLY moving between the extreme dimming values Options for changing parameter 1-255 (10ms - 2,5s)
10: Time of AUTOMATIC moving between the extreme dimming values Options for changing parameter 1-255 (10ms - 2,5s) - 0: this value disables the smooth cha…
11: Dimming step at manual control Options for changing parameter 1-99
12: Maximum dimmer level control Options for changing parameter 2-99
13: Minimum dimmer level control Options for changing parameter 1-98
14: Inputs Button/Switch configuration Binary inputs type configuration
15: Parm 15 Double-click set lighting at 100%
16: Saving state before power failure Saving state before power failure
17: 3-way switch The function of 3-way switch provides the option to double key no. 1. The dimmer may contr…
18: Synchronizing light level for associated devices The dimmer communicate the level to the associated devices. (default value 0)
19: Change [On-Off] bi-stable keys This function allow user to change [On-Off] bi-stable keys (parameter no. 14) (default v…
20: Parm 20 This function will enable decreasing the minimum level of the Dimmer by extending the cont…
30: Relay 1: Response to General Alarm  
39: ALARM FLASHING alarm time Amount of time (ms) the device keeps on flashing after receipt of Alarm Frame
1: Switch 1  
2: Switch 2  
3: Controller Updates  

1: Enable/Disable ALL ON/OFF

Activate/Deactive ALL ON/OFF

Property Value      
Configuration ID config_1_1      
Data Type INTEGER   Default Value 255
Options ALL ON active / ALL OFF active (-1)      
  ALL ON disabled / ALL OFF disabled (0)      
  ALL ON disabled / ALL OFF active (1)      
  ALL ON active / ALL OFF disabled (2)      

6: Separation of association sending (key 1)

Activate/Deactivate association sending for group 1 - Also see param #16

Property Value      
Configuration ID config_6_1      
Data Type INTEGER   Default Value 0
Options Map status to all devices in group 1 (0)      
  Map OFF status to all devices in group 1, Double click on key 1 will s (1)      
  Map OFF status to all devices in group 1, Double click on key 1 will s (2)      

7: Control key #2 behaviour

Key no.2 is not represented by any physical device - only devices in the association list. This functionality prevents of lack of reaction on pressing key no.2 through polling devices from association list one by one and checking their

Property Value      
Configuration ID config_7_1      
Data Type INTEGER   Default Value 1
Options Device status is not checked (0)      
  Device status is checked (1)      

8: Dimming step at automatic control

Property Value
Configuration ID config_8_1
Data Type INTEGER
Range 1 to 99
Default Value 1

9: Time of MANUALLY moving between the extreme dimming values

Options for changing parameter 1-255 (10ms - 2,5s)

Property Value
Configuration ID config_9_1
Data Type INTEGER
Range 1 to 255
Default Value 5

10: Time of AUTOMATIC moving between the extreme dimming values

Options for changing parameter 1-255 (10ms - 2,5s) - 0: this value disables the smooth change in light intensity. NOTE: value 0 is required for inductive and capacitive devices unsuitable for dimming (e.g. fluorescent lamps, motors, etc…)

Property Value
Configuration ID config_10_1
Data Type INTEGER
Range 0 to 255
Default Value 1

11: Dimming step at manual control

Options for changing parameter 1-99

Property Value
Configuration ID config_11_1
Data Type INTEGER
Range 1 to 99
Default Value 1

12: Maximum dimmer level control

Options for changing parameter 2-99

Property Value
Configuration ID config_12_1
Data Type INTEGER
Range 2 to 99
Default Value 2

13: Minimum dimmer level control

Options for changing parameter 1-98

Property Value
Configuration ID config_13_1
Data Type INTEGER
Range 0 to 255
Default Value 0

14: Inputs Button/Switch configuration

Binary inputs type configuration

Property Value      
Configuration ID config_14_1      
Data Type INTEGER   Default Value 0
Options Mono-stable input (button) (0)      
  Bi-stable input (switch) (1)      

15: Parm 15

Double-click set lighting at 100%

Property Value      
Configuration ID config_15_1      
Data Type INTEGER   Default Value 0
Options Disable double click (0)      
  Enable double click (1)      

16: Saving state before power failure

Saving state before power failure

Property Value      
Configuration ID config_16_1      
Data Type INTEGER   Default Value 1
Options State NOT saved at power failure, all outputs are set to OFF upon powe (0)      
  State saved at power failure, all outputs are set to previous state up (1)      

17: 3-way switch

The function of 3-way switch provides the option to double key no. 1. The dimmer may control two bi-stable push-buttons or an infinite number of mono-stable push-buttons. (default value 0)

Property Value      
Configuration ID config_17_1      
Data Type INTEGER   Default Value 0
Options Disable (0)      
  Enable (1)      

18: Synchronizing light level for associated devices

The dimmer communicate the level to the associated devices. (default value 0)

Property Value      
Configuration ID config_18_1      
Data Type INTEGER   Default Value 0
Options Disable (0)      
  Enable (1)      

19: Change [On-Off] bi-stable keys

This function allow user to change [On-Off] bi-stable keys (parameter no. 14) (default value 0)

Property Value      
Configuration ID config_19_1      
Data Type INTEGER   Default Value 0
Options Device changes status on key status change (0)      
  Device status depends on key status; ON when the key is ON, OFF when t (1)      

20: Parm 20

This function will enable decreasing the minimum level of the Dimmer by extending the control impulse.[100 - 170] By changing the minimem level, the user may completely dim LED bulbs. Not all LED bulbs available on the market have the dimmm

Property Value
Configuration ID config_20_1
Data Type INTEGER
Range 100 to 170
Default Value 110

30: Relay 1: Response to General Alarm

Property Value      
Configuration ID config_30_1      
Data Type INTEGER   Default Value 3
Options DEACTIVATION - no response to alarm frames (0)      
  ALARM RELAY ON - relay will turn ON upon receipt of alarm frame (1)      
  ALARM RELAY OFF - relay will turn OFF upon receipt of alarm frame (2)      
  ALARM FLASHING - relay will turn ON and OFF periodically (see param.39 (3)      

39: ALARM FLASHING alarm time

Amount of time (ms) the device keeps on flashing after receipt of Alarm Frame

Property Value
Configuration ID config_39_2
Data Type INTEGER
Range 0 to 65535
Default Value 600

1: Switch 1

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Switch 2

Property Value
Configuration ID group_2
Data Type TEXT
Range to

3: Controller Updates

Property Value
Configuration ID group_3
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.