45605 Duplex receptacle

This describes the Z-Wave device 45605, manufactured by Jasco Products with the thing type UID of ge_45605_00_000.

Duplex receptacle

Channels

The following table summarises the channels available for the 45605 Duplex receptacle.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch

Device Configuration

The following table provides a summary of the configuration parameters available in the 45605 Duplex receptacle. Detailed information on each parameter can be found below.

Parameter Description
3: Night Light Defines the behavior of the blue LED.
4: Invert Switch Change the top of the switch to OFF

3: Night Light

Defines the behavior of the blue LED.

Overview

Default is Night Light mode where LED is on when switch is off.

Property Value      
Configuration ID config_3_1      
Data Type INTEGER   Default Value 0
Options LED on when switch is OFF (0)      
  LED on when switch is ON (1)      
  LED always off (2)      

4: Invert Switch

Change the top of the switch to OFF

Overview

Change the top of the switch to OFF and the bottom of the switch to ON.

Note: If you invert the switches and also install the product upside down remember the load will now be controlled by the right, not the left switch.

Property Value      
Configuration ID config_4_1      
Data Type INTEGER   Default Value 0
Options No (0)      
  Yes (1)      

Did you spot an error in the above definition or want to improve the content? You can edit the database here.