GE 14294 (ZW3005) In-Wall Dimmer Switch

This describes the Z-Wave device GE 14294 (ZW3005), manufactured by Jasco Products with the thing type UID of ge_ge14294_00_000.

In-Wall Dimmer Switch

Channels

The following table summarises the channels available for the GE 14294 (ZW3005) In-Wall Dimmer Switch.

Channel Channel Id Channel Type UID Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the GE 14294 (ZW3005) In-Wall Dimmer Switch. Detailed information on each parameter can be found below.

Parameter Description
3: Night Light Defines the behavior of the blue LED. Default is on when switch is off.
4: Invert Switch Invert the ON/OFF Switch State.
5: Ignore Start-Level (Receiving) This dimmer will start dimming from its current level.
7: On/Off Command Dim Step Indicates how many levels the dimmer will change per step.
8: On/Off Command Dim Rate This sets how often the dim level will change.
9: Local Control Dim Step How many levels the dimmer will change for each step.
10: Local Control Dim Rate This sets how often the dim level will change.
11: ALL ON/ALL OFF Dim Step How many levels the dimmer will change per step.
12: ALL ON/ALL OFF Dim Rate This sets how often the dim level will change.
1: Z-Wave Plus Lifeline Z-Wave Plus Lifeline
3: Scene group This group gets notifications of double taps via basic set

3: Night Light

Defines the behavior of the blue LED. Default is on when switch is off.

Property Value      
Configuration ID config_3_1      
Data Type INTEGER   Default Value 0
Options LED on when switch is OFF (0)      
  LED on when switch is ON (1)      
  LED always off (2)      

4: Invert Switch

Invert the ON/OFF Switch State.

Property Value      
Configuration ID config_4_1      
Data Type INTEGER   Default Value 0
Options No (0)      
  Yes (1)      

5: Ignore Start-Level (Receiving)

This dimmer will start dimming from its current level.

Property Value      
Configuration ID config_5_1      
Data Type INTEGER   Default Value 0
Options No (0)      
  Yes (1)      

7: On/Off Command Dim Step

Indicates how many levels the dimmer will change per step.

Property Value
Configuration ID config_7_1
Data Type INTEGER
Range 1 to 99
Default Value 1

8: On/Off Command Dim Rate

This sets how often the dim level will change.

Property Value
Configuration ID config_8_1
Data Type INTEGER
Range 1 to 255
Default Value 3

9: Local Control Dim Step

How many levels the dimmer will change for each step.

Property Value
Configuration ID config_9_1
Data Type INTEGER
Range 1 to 99
Default Value 1

10: Local Control Dim Rate

This sets how often the dim level will change.

Property Value
Configuration ID config_10_1
Data Type INTEGER
Range 1 to 255
Default Value 3

11: ALL ON/ALL OFF Dim Step

How many levels the dimmer will change per step.

Property Value
Configuration ID config_11_1
Data Type INTEGER
Range 1 to 99
Default Value 1

12: ALL ON/ALL OFF Dim Rate

This sets how often the dim level will change.

Property Value
Configuration ID config_12_1
Data Type INTEGER
Range 1 to 255
Default Value 3

1: Z-Wave Plus Lifeline

Z-Wave Plus Lifeline

Property Value
Configuration ID group_1
Data Type TEXT
Range to

3: Scene group

This group gets notifications of double taps via basic set

Property Value
Configuration ID group_3
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.