ZW3101 Lamp Module

This describes the Z-Wave device ZW3101, manufactured by Jasco Products with the thing type UID of ge_zw3101_00_000.

Lamp Module

Channels

The following table summarises the channels available for the ZW3101 Lamp Module.

Channel Channel Id Channel Type UID Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the ZW3101 Lamp Module. Detailed information on each parameter can be found below.

Parameter Description
5: Ignore Start-Level (Receiving) This dimmer will start dimming from its current level.
7: On/Off Command Dim Step Indicates how many levels the dimmer will change for each dimming step.
8: On/Off Command Dim Rate Dim Rate
9: Local Control Dim Step Indicates how many levels the dimmer will change for each dimming step.
10: Local Control Dim Rate Local Control Dim Rate
11: ALL ON/ALL OFF Dim Step Indicates how many levels the dimmer will change for each dimming step.
12: ALL ON/ALL OFF Dim Rate  
29: Load Sensing  

5: Ignore Start-Level (Receiving)

This dimmer will start dimming from its current level.

Property Value      
Configuration ID config_5_1      
Data Type INTEGER   Default Value 0
Options No (0)      
  Yes (1)      

7: On/Off Command Dim Step

Indicates how many levels the dimmer will change for each dimming step.

Property Value
Configuration ID config_7_1
Data Type INTEGER
Range 1 to 99
Default Value 1

8: On/Off Command Dim Rate

Dim Rate

Property Value
Configuration ID config_8_1
Data Type INTEGER
Range 1 to 255
Default Value 3

9: Local Control Dim Step

Indicates how many levels the dimmer will change for each dimming step.

Property Value
Configuration ID config_9_1
Data Type INTEGER
Range 1 to 99
Default Value 1

10: Local Control Dim Rate

Local Control Dim Rate

Property Value
Configuration ID config_10_1
Data Type INTEGER
Range 1 to 255
Default Value 3

11: ALL ON/ALL OFF Dim Step

Indicates how many levels the dimmer will change for each dimming step.

Property Value
Configuration ID config_11_1
Data Type INTEGER
Range 1 to 99
Default Value 1

12: ALL ON/ALL OFF Dim Rate

Property Value
Configuration ID config_12_1
Data Type INTEGER
Range 1 to 255
Default Value 3

29: Load Sensing

Property Value      
Configuration ID config_29_1      
Data Type INTEGER   Default Value 0
Options Load sensing is disabled (0)      
  Load sensing is enabled (1)      

Did you spot an error in the above definition or want to improve the content? You can edit the database here.