ZW4005, 12722 On/Off Relay Switch
This describes the Z-Wave device ZW4005, 12722, manufactured by Jasco Products with the thing type UID of ge_zw4005_00_000.
On/Off Relay Switch
Overview
Also marketed as GE / Jasco 12722.
Channels
The following table summarises the channels available for the ZW4005, 12722 On/Off Relay Switch.
| Channel | Channel Id | Channel Type UID | Category | Item Type |
|---|---|---|---|---|
| Switch | switch_binary | switch_binary | Switch | Switch |
Device Configuration
The following table provides a summary of the configuration parameters available in the ZW4005, 12722 On/Off Relay Switch. Detailed information on each parameter can be found below.
| Parameter | Description |
|---|---|
| 3: Night Light | Defines the behavior of the blue LED. |
| 4: Invert Switch | Invert the ON/OFF Switch State. |
3: Night Light
Defines the behavior of the blue LED.
Default is Night Light mode where LED is on when switch is off.
| Property | Value | |||
|---|---|---|---|---|
| Configuration ID | config_3_1 | |||
| Data Type | INTEGER | Default Value | 0 | |
| Options | LED on when switch is OFF (0) | |||
| LED on when switch is ON (1) | ||||
| LED always off (2) |
4: Invert Switch
Invert the ON/OFF Switch State.
Setting this parameter to Yes will change the top of the switch to OFF and the bottom to ON.
Note: If you invert the switches and also install the product upside down, the load will now be control
| Property | Value | |||
|---|---|---|---|---|
| Configuration ID | config_4_1 | |||
| Data Type | INTEGER | Default Value | 0 | |
| Options | No (0) | |||
| Yes (1) |
Did you spot an error in the above definition or want to improve the content? You can edit the database here.