DWS01 Door and Window Sensor

This describes the Z-Wave device DWS01, manufactured by Hank with the thing type UID of hank_dws01_00_000.

Door and Window Sensor

Overview

Unit is labeled with HKZW-DWS01

But, also sold as “MONOPRICE Door and Window Sensor P/N 24259”

Channels

The following table summarises the channels available for the DWS01 Door and Window Sensor.

Channel Channel Id Channel Type UID Category Item Type
Binary Sensor sensor_binary sensor_binary Door Switch
Door sensor sensor_door sensor_door Door Contact
Tamper alarm alarm_tamper alarm_tamper   Switch
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the DWS01 Door and Window Sensor. Detailed information on each parameter can be found below.

Parameter Description
14: Enable / disable BASIC SET Enable basic set reporting to group 2
15: Value of BASIC SET Value to send for BASIC SET
32: Level for Low Battery Alarm Adjust the percent of battery left before a low battery level alarm is sent
1: Group 1 Association Group 1
2: Group 2 Association Group 2

14: Enable / disable BASIC SET

Enable basic set reporting to group 2

Property Value      
Configuration ID config_14_1      
Data Type INTEGER   Default Value 0
Options Disable BASIC SET (0)      
  Enable basic set (1)      

15: Value of BASIC SET

Value to send for BASIC SET

Property Value      
Configuration ID config_15_1      
Data Type INTEGER   Default Value 0
Options Send 255 when open (0)      
  Send 0 when open (1)      

32: Level for Low Battery Alarm

Adjust the percent of battery left before a low battery level alarm is sent

Property Value
Configuration ID config_32_1
Data Type INTEGER
Range 10 to 50
Default Value 20

1: Group 1

Association Group 1

Overview
  • Group 1 reports the status of the Door/Window Sensor, the battery level, and the tamper button status. 
Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: Group 2

Association Group 2

Overview
  • Group 2 is assigned to the Door/Window Sensor BASIC SET command. 
Property Value
Configuration ID group_2
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.