HKZW_MS02 Motion Sensor

This describes the Z-Wave device HKZW_MS02, manufactured by Hank with the thing type UID of hank_hkzwms02_00_000.

Motion Sensor

Channels

The following table summarises the channels available for the HKZW_MS02 Motion Sensor.

Channel Channel Id Channel Type UID Category Item Type
Alarm (burglar) alarm_burglar alarm_burglar Door Switch
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the HKZW_MS02 Motion Sensor. Detailed information on each parameter can be found below.

Parameter Description
12: Motion Sensor`s Sensitivity The higher the value,the more sensitive the PIR sensor
14: Enable/Disable Basic Set Command The motion Sensor can reverse its value of BASIC SET when motion is triggered
15: value of basic set command assigned to send Basic Set Command
17: enable/disable shock alarm  
32: Level of low battery Define a battery level ad the “low battery”
1: report the motion detection and battery level  
2: assigned to send BASIC SET command  

12: Motion Sensor`s Sensitivity

The higher the value,the more sensitive the PIR sensor

Property Value      
Configuration ID config_12_1      
Data Type INTEGER   Default Value 8
Options 0 (0)      
  1 (1)      
  2 (2)      

14: Enable/Disable Basic Set Command

The motion Sensor can reverse its value of BASIC SET when motion is triggered

Property Value      
Configuration ID config_14_1      
Data Type INTEGER   Default Value 0
Options Disable (0)      
  enable (1)      

15: value of basic set command

assigned to send Basic Set Command

Property Value      
Configuration ID config_15_1      
Data Type INTEGER   Default Value 0
Options Disable (0)      
  Enable (1)      

17: enable/disable shock alarm

Property Value      
Configuration ID config_17_1      
Data Type INTEGER   Default Value 0
Options Disable (0)      
  enable (1)      

32: Level of low battery

Define a battery level ad the “low battery”

Property Value
Configuration ID config_32_1
Data Type INTEGER
Range 10 to 50
Default Value 20

1: report the motion detection and battery level

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: assigned to send BASIC SET command

Property Value
Configuration ID group_2
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.