RGB bulb HKZW-RGB01-V1.0

This describes the Z-Wave device RGB bulb, manufactured by Hank with the thing type UID of hank_rgbbulb_00_000.

HKZW-RGB01-V1.0

Channels

The following table summarises the channels available for the RGB bulb HKZW-RGB01-V1.0.

Channel Channel Id Channel Type UID Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer
Scene Number scene_number scene_number   Number
Color Control color_color color_color   Color
Color Temperature color_temperature color_temperature ColorLight Dimmer

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the RGB bulb HKZW-RGB01-V1.0. Detailed information on each parameter can be found below.

Parameter Description
21: Status after power failure Define how the RGB BULB will react after the power supply is back on.
24: Notification when Load status change RGB BULB can send notifications to associated device
51: Enable/disable the function of using wall switch Enable/disable the function of using wall switch to turn on/off RGB BULB
61: Advance mode RGB BULB can blink or cyclic/random change color automatically at set intervals.
255: Resetting to factory default RGB BULB will exclude from the Z-Wave network with this particular command
1: Lifeline  

21: Status after power failure

Define how the RGB BULB will react after the power supply is back on.

Property Value      
Configuration ID config_21_1      
Data Type INTEGER   Default Value 0
Options RGB BULB memorizes its state after a power failure (0)      
  Device will be on after power supply is reconnected (1)      
  Device will be off after power supply is reconnected (2)      

24: Notification when Load status change

RGB BULB can send notifications to associated device

Overview

RGB BULB can send notifications to associated device (Group Lifeline) when the status of the RGB BULB is changed.

Property Value      
Configuration ID config_24_1      
Data Type INTEGER   Default Value 1
Options Notifications Disabled (0)      
  Send BASIC REPORT (1)      
  Send BASIC REPORT only without status change (2)      

51: Enable/disable the function of using wall switch

Enable/disable the function of using wall switch to turn on/off RGB BULB

Property Value      
Configuration ID config_51_1      
Data Type INTEGER   Default Value 0
Options Disable (0)      
  Enable (1)      

61: Advance mode

RGB BULB can blink or cyclic/random change color automatically at set intervals.

Overview

RGB BULB can blink or cyclic/random change color automatically at set intervals. It will stop blink or change color when receiving any control command like Basic Set

Property Value      
Configuration ID config_61_4      
Data Type INTEGER   Default Value 3072
Options Stop changing (3072)      
  Color gradual change randomly (16826368)      
  Color change randomly with a breathing blink (33603584)      
  Blink with random color (50380800)      
  Color change randomly (67158016)      
  Color gradual change (285261824)      
  Breathing blink with a specific color (302039040)      
  Blink with a specific color (318816256)      

255: Resetting to factory default

RGB BULB will exclude from the Z-Wave network with this particular command

Property Value      
Configuration ID config_255_4      
Data Type INTEGER   Default Value 1
Options Resetting to the factory default (1431655765)      

1: Lifeline

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.