SCN01 One-key Scene Controller
This describes the Z-Wave device SCN01, manufactured by Hank with the thing type UID of
One-key Scene Controller
There are no available settings to set up the wake up time.
Pressing and holding the Z-Button for 3 seconds. The led will turn to green, which means Scene Controller has successfully sent the wake up notification out.
The following table summarises the channels available for the SCN01 One-key Scene Controller.
|Channel||Channel Id||Channel Type UID||Category||Item Type|
The following table provides a summary of the configuration parameters available in the SCN01 One-key Scene Controller. Detailed information on each parameter can be found below.
|1: Lifeline||Sends associated devices central scene notification command and battery report command.|
|2: On/Off Control||Sends basic set command to associated devices.|
|3: Dimming Control||Sends switch multilevel set, multilevel start level change and multilevel stop level chang…|
Sends associated devices central scene notification command and battery report command.
2: On/Off Control
Sends basic set command to associated devices.
3: Dimming Control
Sends switch multilevel set, multilevel start level change and multilevel stop level change to associated devices.
Did you spot an error in the above definition or want to improve the content? You can edit the database here.