DX1CG-Z CH4 Gas Sensor
This describes the Z-Wave device DX1CG-Z, manufactured by Heiman Technology Co. Ltd with the thing type UID of
The device is in the category of Sensor, defining Device used to measure something.
The DX1CG-Z supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data from other devices.
No device information is provided in the database. Consider updating the database to improve the documentation.
The following table summarises the channels available for the DX1CG-Z -:
|Channel||Channel Id||Category||Item Type|
Indicates if an alarm is triggered.
alarm_general channel supports the
Switch item and is in the
Door category. This is a read only channel so will only be updated following state changes from the device.
The following state translation is provided for this channel to the
Switch item type -:
The device has no configuration parameters configured.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The device does not support associations.
|COMMAND_CLASS_ALARM_V1||Linked to BASIC|
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.