Heiman CO Detector CO Detector

This describes the Z-Wave device Heiman CO Detector, manufactured by Heiman Technology Co. Ltd with the thing type UID of heiman_codetector_00_000.

CO Detector

Inclusion Information

Set the z-Wave controller to inclusion mode and then quickly triple press button behind small hole on the side of the CO-Sensor device to include. You can use a needle or an SIM card extractor to push the button behind the small hole on the side of the device.

Exclusion Information

Set the z-Wave controller to exclusion mode and then quickly triple press button behind small hole on the side of the CO-Sensor device to exclude. You can use a needle or an SIM card extractor to push the button behind the small hole on the side of the device.

Channels

The following table summarises the channels available for the Heiman CO Detector CO Detector.

Channel Channel Id Channel Type UID Category Item Type
Binary Sensor sensor_binary sensor_binary Door Switch
Alarm (CO) alarm_co alarm_co Door Switch
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the Heiman CO Detector CO Detector. Detailed information on each parameter can be found below.

| Parameter | Description | |————-|————-|


Did you spot an error in the above definition or want to improve the content? You can edit the database here.