HS1SA Smoke Detector

This describes the Z-Wave device HS1SA, manufactured by Heiman Technology Co. Ltd with the thing type UID of heiman_hs1sa_00_000.

Smoke Detector

Overview

The smart smoke sensor detects smoke, and sends an alarm signals to alert of danger. When the smart smoke sensor detects smoke, it will send an alarm notification to your controller through wireless Z-Wave communication protocol.

Inclusion Information

Press the pin 3 times within 1.5s, Green LED is Blinking 3 times within 1 second. If Inclusion Process is successful, Green led will turn off.

Exclusion Information

Press the pin 3 times within 1.5s. If Exclusion Process is successful, Green led is Blinking 6 times, then turn off. 

Wakeup Information

Wake up Notification is transmitted every 24 hours by default. Wake up Notification is transmitted after Notification Report is Transmitted.

Channels

The following table summarises the channels available for the HS1SA Smoke Detector.

Channel Channel Id Channel Type UID Category Item Type
Binary Sensor sensor_binary sensor_binary Door Switch
Alarm (smoke) alarm_smoke alarm_smoke Door Switch
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the HS1SA Smoke Detector. Detailed information on each parameter can be found below.

| Parameter | Description | |————-|————-|


Did you spot an error in the above definition or want to improve the content? You can edit the database here.