The openHAB Documentation Has Moved

The documentation has moved to openhab.org/docs and openhab.org/addons.

Please use the link below to be redirected to the new version of this article, and update your bookmarks.

HS-WD200+ Scene Capable Wall Dimmer Switch

This describes the Z-Wave device HS-WD200+, manufactured by HomeSeer Technologies with the thing type UID of homeseer_hswd200_00_000.

The device is in the category of Wall Switch, defining Any device attached to the wall that controls a binary status of something, for ex. a light switch.

HS-WD200+ product image

The HS-WD200+ supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data from other devices.

Overview

No device information is provided in the database. Consider updating the database to improve the documentation.

Channels

The following table summarises the channels available for the HS-WD200+ -:

Channel Channel Id Category Item Type
Dimmer switch_dimmer DimmableLight Dimmer
Scene Number scene_number   Number
Mode of Operation config_decimal   Decimal
Normal mode LED colour config_decimal   Decimal
Status mode LED 1 Colour config_decimal   Decimal
Status mode LED 2 Colour config_decimal   Decimal
Status mode LED 3 Colour config_decimal   Decimal
Status mode LED 4 Colour config_decimal   Decimal
Status mode LED 5 Colour config_decimal   Decimal
Status mode LED 6 Colour config_decimal   Decimal
Status mode LED 7 Colour config_decimal   Decimal
Status mode LEDs Blink frequency config_decimal   Decimal
Status mode LEDs Blink status (Bitmask) config_decimal   Decimal

Dimmer

The brightness channel allows to control the brightness of a light. It is also possible to switch the light on and off.

The switch_dimmer channel supports the Dimmer item and is in the DimmableLight category.

Scene Number

Triggers when a scene button is pressed.

The scene_number channel supports the Number item.

Mode of Operation

Sets dimmer mode of operation.

0=Normal mode (load status) 1=Status mode (custom status)

Generic class for configuration parameter.

The config_decimal channel supports the Decimal item.

Normal mode LED colour

Sets the Normal mode LED colour

Possible values: 0-6

0=White, 1=Red, 2=Green, 3=Blue, 4=Magenta, 5=Yellow, 6=Cyan

Generic class for configuration parameter.

The config_decimal channel supports the Decimal item.

Status mode LED 1 Colour

LED 1 is the Bottom LED

Possible values: 0-7

0=Off, 1=Red, 2=Green, 3=Blue, 4=Magenta, 5=Yellow, 6=Cyan, 7=White

Generic class for configuration parameter.

The config_decimal channel supports the Decimal item.

Status mode LED 2 Colour

Possible values: 0-7

0=Off, 1=Red, 2=Green, 3=Blue, 4=Magenta, 5=Yellow, 6=Cyan, 7=White

Generic class for configuration parameter.

The config_decimal channel supports the Decimal item.

Status mode LED 3 Colour

Possible values: 0-7

0=Off, 1=Red, 2=Green, 3=Blue, 4=Magenta, 5=Yellow, 6=Cyan, 7=White

Generic class for configuration parameter.

The config_decimal channel supports the Decimal item.

Status mode LED 4 Colour

Possible values: 0-7

0=Off, 1=Red, 2=Green, 3=Blue, 4=Magenta, 5=Yellow, 6=Cyan, 7=White

Generic class for configuration parameter.

The config_decimal channel supports the Decimal item.

Status mode LED 5 Colour

Possible values: 0-7

0=Off, 1=Red, 2=Green, 3=Blue, 4=Magenta, 5=Yellow, 6=Cyan, 7=White

Generic class for configuration parameter.

The config_decimal channel supports the Decimal item.

Status mode LED 6 Colour

Possible values: 0-7

0=Off, 1=Red, 2=Green, 3=Blue, 4=Magenta, 5=Yellow, 6=Cyan, 7=White

Generic class for configuration parameter.

The config_decimal channel supports the Decimal item.

Status mode LED 7 Colour

LED 7 is the top LED

Possible values: 0-7

0=Off, 1=Red, 2=Green, 3=Blue, 4=Magenta, 5=Yellow, 6=Cyan, 7=White

Generic class for configuration parameter.

The config_decimal channel supports the Decimal item.

Sets the dimmer Blink frequency for All LEDs in Status mode

Possible values: 0, 1-255

0=No blink, 1=100ms ON then 100ms OFF

Generic class for configuration parameter.

The config_decimal channel supports the Decimal item.

Generic class for configuration parameter.

The config_decimal channel supports the Decimal item.

Device Configuration

The following table provides a summary of the 21 configuration parameters available in the HS-WD200+. Detailed information on each parameter can be found in the sections below.

Param Name Description
3 Bottom LED Operation Sets the operation of the bottom LED
4 Orientation Set paddle’s load orientation
11 Remote Ramp Rate Set dimmer ramp rate for remote control
12 Local Ramp Rate Set dimmer ramp rate for local control
13 Status Mode Set dimmer display mode
14 Load Status LED Color Set the LED color when displaying load status
21 Status LED 1 Color Status LED 1 Color (bottom)
22 Status LED 2 Color Status LED 2 Color
23 Status LED 3 Color Status LED 3 Color
24 Status LED 4 Color Status LED 4 Color
25 Status LED 5 Color Status LED 5 Color
26 Status LED 6 Color Status LED 6 Color
27 Status LED 7 Color Status LED 7 Color (top)
30 Blink Frequency Set blink frequency when displaying custom status
31 LED 1 Blink Status LED 1 Blink Status (bottom)
31 LED 2 Blink Status LED 2 Blink Status
31 LED 3 Blink Status LED 3 Blink Status
31 LED 4 Blink Status LED 4 Blink Status
31 LED 5 Blink Status LED 5 Blink Status
31 LED 6 Blink Status LED 6 Blink Status
31 LED 7 Blink Status LED 7 Blink Status (top)
  Switch All Mode Set the mode for the switch when receiving SWITCH ALL commands

Parameter 3: Bottom LED Operation

Sets the operation of the bottom LED

The following option values may be configured -:

Value Description
0 Bottom LED ON if load is OFF
1 Bottom LED OFF if load is OFF

The manufacturer defined default value is 1 (Bottom LED OFF if load is OFF).

This parameter has the configuration ID config_3_1 and is of type INTEGER.

Parameter 4: Orientation

Set paddle’s load orientation

The following option values may be configured -:

Value Description
0 Top of Paddle turns load ON
1 Bottom of Paddle turns load ON

The manufacturer defined default value is 0 (Top of Paddle turns load ON).

This parameter has the configuration ID config_4_1 and is of type INTEGER.

Parameter 11: Remote Ramp Rate

Set dimmer ramp rate for remote control

Values in the range 0 to 90 may be set.

The manufacturer defined default value is 3.

This parameter has the configuration ID config_11_1 and is of type INTEGER.

Parameter 12: Local Ramp Rate

Set dimmer ramp rate for local control

Values in the range 0 to 90 may be set.

The manufacturer defined default value is 3.

This parameter has the configuration ID config_12_1 and is of type INTEGER.

Parameter 13: Status Mode

Set dimmer display mode

The following option values may be configured -:

Value Description
0 Load Status
1 Custom Status

The manufacturer defined default value is 0 (Load Status).

This parameter has the configuration ID config_13_1 and is of type INTEGER.

Parameter 14: Load Status LED Color

Set the LED color when displaying load status

The following option values may be configured -:

Value Description
0 White
1 Red
2 Green
3 Blue
4 Magenta
5 Yellow
6 Cyan

The manufacturer defined default value is 0 (White).

This parameter has the configuration ID config_14_1 and is of type INTEGER.

Parameter 21: Status LED 1 Color

Status LED 1 Color (bottom)

The following option values may be configured -:

Value Description
0 Off
1 Red
2 Green
3 Blue
4 Magenta
5 Yellow
6 Cyan
7 White

The manufacturer defined default value is 0 (Off).

This parameter has the configuration ID config_21_1 and is of type INTEGER.

Parameter 22: Status LED 2 Color

Status LED 2 Color

The following option values may be configured -:

Value Description
0 Off
1 Red
2 Green
3 Blue
4 Magenta
5 Yellow
6 Cyan
7 White

The manufacturer defined default value is 0 (Off).

This parameter has the configuration ID config_22_1 and is of type INTEGER.

Parameter 23: Status LED 3 Color

Status LED 3 Color

The following option values may be configured -:

Value Description
0 Off
1 Red
2 Green
3 Blue
4 Magenta
5 Yellow
6 Cyan
7 White

The manufacturer defined default value is 0 (Off).

This parameter has the configuration ID config_23_1 and is of type INTEGER.

Parameter 24: Status LED 4 Color

Status LED 4 Color

The following option values may be configured -:

Value Description
0 Off
1 Red
2 Green
3 Blue
4 Magenta
5 Yellow
6 Cyan
7 White

The manufacturer defined default value is 0 (Off).

This parameter has the configuration ID config_24_1 and is of type INTEGER.

Parameter 25: Status LED 5 Color

Status LED 5 Color

The following option values may be configured -:

Value Description
0 Off
1 Red
2 Green
3 Blue
4 Magenta
5 Yellow
6 Cyan
7 White

The manufacturer defined default value is 0 (Off).

This parameter has the configuration ID config_25_1 and is of type INTEGER.

Parameter 26: Status LED 6 Color

Status LED 6 Color

The following option values may be configured -:

Value Description
0 Off
1 Red
2 Green
3 Blue
4 Magenta
5 Yellow
6 Cyan
7 White

The manufacturer defined default value is 0 (Off).

This parameter has the configuration ID config_26_1 and is of type INTEGER.

Parameter 27: Status LED 7 Color

Status LED 7 Color (top)

The following option values may be configured -:

Value Description
0 Off
1 Red
2 Green
3 Blue
4 Magenta
5 Yellow
6 Cyan
7 White

The manufacturer defined default value is 0 (Off).

This parameter has the configuration ID config_27_1 and is of type INTEGER.

Set blink frequency when displaying custom status

The following option values may be configured, in addition to values in the range 0 to 255 -:

Value Description
0 No Blink
1 Blink 100ms ON, 100ms OFF
2 Blink 200ms ON, 200ms OFF
3 Blink 300ms ON, 300ms OFF
4 Blink 400ms ON, 400ms OFF
5 Blink 500ms ON, 500ms OFF

The manufacturer defined default value is 0 (No Blink).

This parameter has the configuration ID config_30_1 and is of type INTEGER.

LED 1 Blink Status (bottom)

The following option values may be configured -:

Value Description
0 Solid
1 Blink

The manufacturer defined default value is 0 (Solid).

This parameter has the configuration ID config_31_1_00000001 and is of type INTEGER.

LED 2 Blink Status

The following option values may be configured -:

Value Description
0 Solid
1 Blink

The manufacturer defined default value is 0 (Solid).

This parameter has the configuration ID config_31_1_00000002 and is of type INTEGER.

LED 3 Blink Status

The following option values may be configured -:

Value Description
0 Solid
1 Blink

The manufacturer defined default value is 0 (Solid).

This parameter has the configuration ID config_31_1_00000004 and is of type INTEGER.

LED 4 Blink Status

The following option values may be configured -:

Value Description
0 Solid
1 Blink

The manufacturer defined default value is 0 (Solid).

This parameter has the configuration ID config_31_1_00000008 and is of type INTEGER.

LED 5 Blink Status

The following option values may be configured -:

Value Description
0 Solid
1 Blink

The manufacturer defined default value is 0 (Solid).

This parameter has the configuration ID config_31_1_00000010 and is of type INTEGER.

LED 6 Blink Status

The following option values may be configured -:

Value Description
0 Solid
1 Blink

The manufacturer defined default value is 0 (Solid).

This parameter has the configuration ID config_31_1_00000020 and is of type INTEGER.

LED 7 Blink Status (top)

The following option values may be configured -:

Value Description
0 Solid
1 Blink

The manufacturer defined default value is 0 (Solid).

This parameter has the configuration ID config_31_1_00000040 and is of type INTEGER.

Switch All Mode

Set the mode for the switch when receiving SWITCH ALL commands.

The following option values may be configured -: | Value | Description | |——–|————-| | 0 | Exclude from All On and All Off groups | | 1 | Include in All On group | | 2 | Include in All Off group | | 255 | Include in All On and All Off groups |

This parameter has the configuration ID switchall_mode and is of type INTEGER.

Association Groups

Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.

The HS-WD200+ supports 1 association group.

Group 1: Lifeline

Lifeline association only supports the “manual reset” event. This group supports 5 nodes.

Technical Information

Endpoints

Endpoint 0

Command Class Comment
COMMAND_CLASS_NO_OPERATION_V1  
COMMAND_CLASS_BASIC_V1  
COMMAND_CLASS_SWITCH_MULTILEVEL_V3 Linked to BASIC
COMMAND_CLASS_SWITCH_ALL_V1  
COMMAND_CLASS_SCENE_ACTIVATION_V1  
COMMAND_CLASS_SCENE_ACTUATOR_CONF_V1  
COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1  
COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1  
COMMAND_CLASS_CENTRAL_SCENE_V3  
COMMAND_CLASS_ZWAVEPLUS_INFO_V1  
COMMAND_CLASS_CONFIGURATION_V1  
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1  
COMMAND_CLASS_POWERLEVEL_V1  
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V1  
COMMAND_CLASS_ASSOCIATION_V2  
COMMAND_CLASS_VERSION_V2  

Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.