HS-WD100+ Scene Capable Wall Dimmer Switch

This describes the Z-Wave device HS-WD100+, manufactured by HomeSeer Technologies with the thing type UID of homeseer_hswd100_00_000.

Scene Capable Wall Dimmer Switch

Channels

The following table summarises the channels available for the HS-WD100+ Scene Capable Wall Dimmer Switch.

Channel Channel Id Channel Type UID Category Item Type
Dimmer switch_dimmer switch_dimmer DimmableLight Dimmer
Scene Number scene_number scene_number   Number

Dimmer

Restore Last Value

Restore Last Dimming level on ON.

Property Value      
Configuration ID config_restoreLastValue      
Data Type BOOLEAN   Default Value true
Options Restore Last Value (true)      
  Restore Full Brightness (false)      

Device Configuration

The following table provides a summary of the configuration parameters available in the HS-WD100+ Scene Capable Wall Dimmer Switch. Detailed information on each parameter can be found below.

Parameter Description
4: Orientation Controls the on/off orientation of the rocker switch
7: Remote Dimming Level Increment Number of levels (1-99) to change dimming each step when controlled remotely
8: Remote Dimming Step Duration Time interval (in tens of ms) of brightness change when controlled remotely
9: Local Dimming Level Increment Number of levels (1-99) to change dimming each step when controlled locally
10: Local Dimming Step Duration Time interval (in tens of ms) of brightness change when controlled locally
1: Group 1 Lifeline association only supports the “manual reset” event.

4: Orientation

Controls the on/off orientation of the rocker switch

Property Value      
Configuration ID config_4_1      
Data Type INTEGER   Default Value 0
Options Normal (0)      
  Inverted (1)      

7: Remote Dimming Level Increment

Number of levels (1-99) to change dimming each step when controlled remotely

Overview

This is the step value that the dimmer level is incremented or decremented for each step duration when controlled remotely.

(This parameter was added in firmware version 5.14)

Property Value
Configuration ID config_7_1
Data Type INTEGER
Range 1 to 99
Default Value 1

8: Remote Dimming Step Duration

Time interval (in tens of ms) of brightness change when controlled remotely

Overview

Select time interval to move to the next brightness level. The larger the number, the slower the adjustment to dim levels. 

(This parameter was added in firmware version 5.14)

Property Value
Configuration ID config_8_1
Data Type INTEGER
Range 1 to 255
Default Value 3

9: Local Dimming Level Increment

Number of levels (1-99) to change dimming each step when controlled locally

Overview

This is the step value that the dimmer level is incremented or decremented for each step duration when controlled locally.

Property Value
Configuration ID config_9_1
Data Type INTEGER
Range 1 to 99
Default Value 1

10: Local Dimming Step Duration

Time interval (in tens of ms) of brightness change when controlled locally

Overview

Select time interval to move to the next brightness level. The larger the number, the slower the adjustment to dim levels. 

Property Value
Configuration ID config_10_2
Data Type INTEGER
Range 1 to 255
Default Value 3

1: Group 1

Lifeline association only supports the “manual reset” event.

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.