HS-WS100+ Scene Capable Wall Switch

This describes the Z-Wave device HS-WS100+, manufactured by HomeSeer Technologies with the thing type UID of homeseer_hsws100_00_000.

Scene Capable Wall Switch

Channels

The following table summarises the channels available for the HS-WS100+ Scene Capable Wall Switch.

Channel Channel Id Channel Type UID Category Item Type
Switch switch_binary switch_binary Switch Switch
Scene Number scene_number scene_number   Number

Device Configuration

The following table provides a summary of the configuration parameters available in the HS-WS100+ Scene Capable Wall Switch. Detailed information on each parameter can be found below.

Parameter Description
3: Indicator LED Defines the behavior of the indicator LED.
4: Orientation Controls the on/off orientation of the rocker switch
1: Group 1 Lifeline association only supports the “manual reset” and “central scene” event.

3: Indicator LED

Defines the behavior of the indicator LED.

Overview

Defines the behavior of the indicator LED.  Default is Night Light mode where LED is on when switch is off.

Property Value      
Configuration ID config_3_1      
Data Type INTEGER   Default Value 0
Options LED on when switch is OFF (0)      
  LED on when switch is ON (1)      
  LED always off (2)      

4: Orientation

Controls the on/off orientation of the rocker switch

Property Value      
Configuration ID config_4_1      
Data Type INTEGER   Default Value 0
Options Normal (0)      
  Inverted (1)      

1: Group 1

Lifeline association only supports the “manual reset” and “central scene” event.

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.