SRT323 Secure Z-Wave Room Thermostat

This describes the Z-Wave device SRT323, manufactured by Horstmann Controls Limited with the thing type UID of horstmann_srt323_00_000.

Secure Z-Wave Room Thermostat

Channels

The following table summarises the channels available for the SRT323 Secure Z-Wave Room Thermostat.

Channel Channel Id Channel Type UID Category Item Type
Sensor (temperature) sensor_temperature sensor_temperature Temperature Number
Thermostat mode thermostat_mode horstmann_srt323_00_000_thermostat_mode Temperature Number
Thermostat Operating State thermostat_state thermostat_state Temperature Number
Setpoint (heating) thermostat_setpoint_heating thermostat_setpoint Temperature Number
  battery-level system.battery-level    

Sensor (temperature)

Scale

Select the scale for temperature readings

Property Value      
Configuration ID config_scale      
Data Type TEXT   Default Value 0
Options Celsius (0)      
  Fahrenheit (1)      

Setpoint (heating)

Scale

Select the scale to use for setpoints.

Property Value      
Configuration ID config_scale      
Data Type TEXT   Default Value 0
Options Celsius (0)      
  Fahrenheit (1)      

Device Configuration

The following table provides a summary of the configuration parameters available in the SRT323 Secure Z-Wave Room Thermostat. Detailed information on each parameter can be found below.

Parameter Description
1: 1: Temperature Sensor Disable or enable temperature sensor
2: 2: Temperature Scale Temperature Scale
3: 3: Delta T Define the temperature steps
1: 1: Lifeline  
2: 2: Nodes to receive Thermostat Operating State reports  
3: 3: Nodes to receive unsolicited Low Battery Warnings  
4: 4: Nodes to receive unsolicited Thermostat Set Point Reports  
5: 5: Nodes to receive unsolicited Multilevel Sensor Reports  

1: 1: Temperature Sensor

Disable or enable temperature sensor

Property Value      
Configuration ID config_1_1      
Data Type INTEGER   Default Value 255
Options Disabled (0)      
  Enabled (255)      

2: 2: Temperature Scale

Temperature Scale

Property Value      
Configuration ID config_2_1      
Data Type INTEGER   Default Value 0
Options Celsius (0)      
  Fahrenheit (255)      

3: 3: Delta T

Define the temperature steps

Overview

Change between temperatures to trigger a temperature report (step 0.1) (Default 10 = 1C)

Property Value
Configuration ID config_3_1
Data Type INTEGER
Range 0 to 100
Default Value 10

1: 1: Lifeline

Property Value
Configuration ID group_1
Data Type TEXT
Range to

2: 2: Nodes to receive Thermostat Operating State reports

Property Value
Configuration ID group_2
Data Type TEXT
Range to

3: 3: Nodes to receive unsolicited Low Battery Warnings

Property Value
Configuration ID group_3
Data Type TEXT
Range to

4: 4: Nodes to receive unsolicited Thermostat Set Point Reports

Property Value
Configuration ID group_4
Data Type TEXT
Range to

5: 5: Nodes to receive unsolicited Multilevel Sensor Reports

Property Value
Configuration ID group_5
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.