IDL-101 Z-Wave Lock

This describes the Z-Wave device IDL-101, manufactured by Alphonsus Tech with the thing type UID of idlock_idl101_00_000.

Z-Wave Lock

Overview

http://idlock.no/

Inclusion Information

  1. Bring the controller as close as possible to the lock unit
  2. Set the controller to inclusion mode
  3. Push and hold KEY button on the inside panel on the lock until all keys on the outside light up and a audible signal is given.
  4. Release the KEY button on the inside panel
  5. Press the key 8 on the outside panel
  6. The LED flashes blue when inclusion is in progress
  7. The inclusion may take some time as security is required

Exclusion Information

  1. Set the controller to exclusion mode
  2. Push and hold KEY button on the inside panel on the lock until all keys on the outside light up and a audible signal is given.
  3. Release the KEY button on the inside panel
  4. Press the key 8 on the outside panel
  5. The LED flashes blue when exclusion is done

Wakeup Information

This is a frequently listening device (FLIRS) which supports beaming. This means that the lock will check regularly for incoming commands, and respond quickly without the need for any user specification of wakeup intervals or physical wakeup procedures.

Channels

The following table summarises the channels available for the IDL-101 Z-Wave Lock.

Channel Channel Id Channel Type UID Category Item Type
Door Lock lock_door lock_door Door Switch
Alarm (access) alarm_access alarm_access Door Switch
Alarm (burglar) alarm_burglar alarm_burglar Door Switch
Alarm (emergency) alarm_general alarm_general Door Switch
Alarm (number) alarm_number alarm_number    
Alarm (raw) alarm_raw alarm_raw   String
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the IDL-101 Z-Wave Lock. Detailed information on each parameter can be found below.

Parameter Description
1: Door Lock Mode Sets the door lock mode
2: RFID Register Mode Sets the RFID registration mode
1: Lifeline Notification reports are sent out to devices included in this association group

1: Door Lock Mode

Sets the door lock mode

Overview

No details in manual, will update when the meaning of this parameter is uncovered.

Property Value      
Configuration ID config_1_1      
Data Type INTEGER   Default Value 1
Options Disable Away Manual Lock (0)      
  Disable Away Auto Lock (1)      
  Enable Away Manual Lock (2)      
  Enable Away Auto Lock (3)      

2: RFID Register Mode

Sets the RFID registration mode

Property Value
Configuration ID config_2_2
Data Type INTEGER
Range 0 to 65535
Default Value 0

1: Lifeline

Notification reports are sent out to devices included in this association group

Property Value
Configuration ID group_1
Data Type TEXT
Range to

Did you spot an error in the above definition or want to improve the content? You can edit the database here.