SmoothRemote SmoothRemote

This describes the Z-Wave device SmoothRemote, manufactured by INNOVUS with the thing type UID of innovus_smoothremote_00_000.

SmoothRemote

Channels

The following table summarises the channels available for the SmoothRemote SmoothRemote.

Channel Channel Id Channel Type UID Category Item Type
  battery-level system.battery-level    

Device Configuration

The following table provides a summary of the configuration parameters available in the SmoothRemote SmoothRemote. Detailed information on each parameter can be found below.

Parameter Description
0: Button Press Time Button Press Time, time for presses on a single button to register as seperate and not par…
1: Button Multiple Press Time Button Multiple Press Time, time for presses on multiple buttons to register as seperate a…
2: Button Hold Time Button Hold Time, time for presses to register as being held down in 0.01s. 0 is interpret…
3: Network Update Interval Network Update Interval, time between network updates in 256 seconds. Disabled if 0.

0: Button Press Time

Button Press Time, time for presses on a single button to register as seperate and not part of a sequence, measured in 0.01s. 0 is interpreted as a 1.

Overview

Warning: All Configuration values have serious effects on the functioning of the device and as such shouldn’t be changed unless one is certain of the consequences.

Property Value
Configuration ID config_0_1
Data Type INTEGER
Range 0 to 255
Default Value 50

1: Button Multiple Press Time

Button Multiple Press Time, time for presses on multiple buttons to register as seperate and not part of a sequence, measured in 0.01 s. 0 is interpreted as a 1.

Overview

Warning: All Configuration values have serious effects on the functioning of the device and as such shouldn’t be changed unless one is certain of the consequences.

Property Value
Configuration ID config_1_1
Data Type INTEGER
Range 0 to 255
Default Value 100

2: Button Hold Time

Button Hold Time, time for presses to register as being held down in 0.01s. 0 is interpreted as a 1.

Overview

Warning: All Configuration values have serious effects on the functioning of the device and as such shouldn’t be changed unless one is certain of the consequences. 

Property Value
Configuration ID config_2_1
Data Type INTEGER
Range 0 to 255
Default Value 40

3: Network Update Interval

Network Update Interval, time between network updates in 256 seconds. Disabled if 0.

Overview

Warning: All Configuration values have serious effects on the functioning of the device and as such shouldn’t be changed unless one is certain of the consequences. 

Property Value
Configuration ID config_3_2
Data Type INTEGER
Range 0 to 65535
Default Value 168

Did you spot an error in the above definition or want to improve the content? You can edit the database here.