HA-01C In-Wall Dual Receptacle
This describes the Z-Wave device HA-01C, manufactured by Intermatic with the thing type UID of
In-Wall Dual Receptacle
The Intermatic HA01C Wall Receptacle is an in-wall Z-Wave switch that can be controlled to automatically and wirelessly to replace an existing receptacle to control lamps, or small appliances. It also works as a range extender for your other Z-Wave devices. This In-Wall receptacle features two plug receptacles, both of which provide standard power operation, only the bottom plug in the outlet is controllable by Z-Wave. Ratings: 15 A, 125 VAC, 50/60 Hz Operating Temperature Range: 32°F to 104°F / 0°C to 40°C Radio Operating Frequency: 908.42 MHz RF (wireless) Range: 50-100 ft. under normal operating conditions
After hard-wiring the HA01 into place, the device is ready to join your Z-Wave™ network.
NOTE: Before you begin, devices (such as lamps) should be plugged in and turned ON before including the HA01 in your network. Put the controller into INCLUSION mode. Press the ON/OFF/PROGRAM button on the HA01 In-Wall Receptacle.
If necessary, you can delete the HA01 In-Wall Receptacle from your Z-Wave™ network. Put the controller into EXCLUSION mode. Press the ON/OFF/PROGRAM button on the HA01 In-Wall Receptacle.
The following table summarises the channels available for the HA-01C In-Wall Dual Receptacle.
|Channel||Channel Id||Channel Type UID||Category||Item Type|
The following table provides a summary of the configuration parameters available in the HA-01C In-Wall Dual Receptacle. Detailed information on each parameter can be found below.
| Parameter | Description | |————-|————-|
Did you spot an error in the above definition or want to improve the content? You can edit the database here.